Active RFID Tag Code Repeater/Reader
Active RFID Tag Code Repeater/Reader
Description
Overview
This active RFID tag code repeater is used to perform reading of several Active RFID tags located in a mobile trailer from a fixed base. It allows to re-emit to all the Active Tag’s ID codes placed inside of a metallic enclosure, which may strongly attenuate the radio signals (trailer, container, wagon, vehicle, bus).
Key Features
- Reader & Re- emitter of ID codes for Active Tags and Badges
- Re-emitter External antenna connector
- Re-emitter range up to 200m
- Integrated 433MHz Reader’s antenna (external in option on demand)
- IP54 Waterproof ABS casing
- User -definable reading distance, through PC running freeware.
Technical Specifications
| Power supply | 12V |
| Average Current | 20mA@12V |
| Frequency | 433.92 MHz |
| Reception | Integrated Reader and ¼ wave antenna – “On-Line” mode defined by default |
| Detection Distance | User-definable from 1 up to 30m, over 360°, by the ERM configuration software, running on PC |
| Emission | Integrated high range Emitter (up to 200m). User-definable emission power, by DIP-switches with 3 predefined levels |
| Operating temperature | SUBD RS232 Male connector – Gland connector for power supply
Female BNC connector for Emission Antenna |
| DEL Indicator | Green DEL for power supply indication |
| Housing | ABS Material, 180x 110 x 90 mm
IP54 Waterproof 4 internal holes for wall mounting |
| Operating Temperature | -25° to 60°C |
| Standards | EN 301 489 – 3 : 2002 V1.4.1 ; EN 300 220 – 2007 : V2.1.2 ; CE Mark ; RoHS Certified |
