UHF 860-960 MHz Fixed RFID Reader/Writer w/ 2 Antenna ports

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

UHF 860-960 MHz Fixed RFID Reader/Writer w/ 2 Antenna ports

SKU: 214a180dd75c Category:


Overview – UHF Gen 2 Fixed RFID Reader/Writer with 2 Antenna ports

Download Our PDF Product Document
Download Our PDF Product Document

This UHF Gen 2 Fixed RFID Reader/Writer features Autopilot which eases deployment and maintenance. It also features an autoset function which continuously optimizes the reader’s configuration for the best, most reliable performance. A low duty cycle reduces RF interference, power consumption and energy costs. Dynamic antenna switching improves throughput and helps the reader work more efficiently. This RFID reader also delivers increased application flexibility via support for Power over Ethernet (PoE), which simplifies deployment and dramatically reduces cost by eliminating the need for AC outlet installation at read points.

Key Features – UHF Gen 2 Fixed RFID Reader/Writer with 2 Antenna ports

  • 2 antenna ports
  • Power over Ethernet
  • Autopilot (automatically senses environment and configures settings for best performance)
  • Enterprise-class management and monitoring
  • Support from industry-leading software vendors such as Microsoft and IBM
  • Industry standard application interface with support for EPCglobal Low Level Reader Protocol (LLRP)
  • Industry’s best sensitivity
  • Innovative features to enable read zone containment and eliminate stray reads
  • High transmit power capable to overcome cable losses
  • EPCglobal-compliant design
  • Quality design resulting in industry’s highest reliability

Technical Specifications – UHF Gen 2 Fixed RFID Reader/Writer with 2 Antenna ports


Model 236018
RF Protocol EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Typical Throughput in Challenging Environment (Autoset Dense Reader Mode for FCC) 300 tags/second
Supported Regions US, Canada, and other regions following US FCC Part 15 regulations
Antennas 2 high performance, monostatic antenna ports
Transmit Power 10.0 to 30.0 dBm (PoE)
10.0 to 32.5 dBm (external universal power supply)
Max Receive Sensitivity -82 dBm
Max Return Loss 10 dB
Application Interface EPCglobal Low Level Reader Protocol (LLRP)
Network Connectivity 10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)
IP Address Configuration DHCP
Link Local Addressing (LLA) with Multicast DNS (mDNS)
Time Synchronization Network Time Protocol (NTP)
Management Interfaces Management Console using serial management console port, telnet or SSH
EPCglobal Reader Management v1.0.1Syslog
Reliable Firmware Upgrade Dual image partitions enable smooth transition to new firmware while the reader is still operating
Scalable upgrade mechanism enables simultaneous scheduled upgrades of multiple readers
Management Console RS-232 using a standard Cisco-style management Cable (DB-9 to RJ-45)
Baud rate: 115200, Data: 8 bit, Parity: none, Stop: 1 bit, Flow control: none
USB USB 1.1 Device (Type B) and Host (Type A) ports
GPIO 4 inputs, optically isolated 3 V to 30 V; 4 outputs, optically isolated, 0 Vto30 V, non-isolated 5 V, 100 mA supply (DB-15)
Power Sources Power over Ethernet (PoE) IEEE 802.3af +24 VDC at800mA via external universal power supply with locking connector-sold separately
Power Consumption (Idle, Typical, LDC) PoE at 30 dBm: 3 W, 11.5 W, 6 W
Power Supply at 30 dBm: 3 W, 13.5 W, 6 W
Power Supply at 32.5 dBm: 3 W, 15 W, 6 W
Environmental Sealing IEC IP52
Operating Temperature -20 °C to 50 °C
Humidity 5% to 95%, non-condensing
Dimensions (H × W × D) 7.5 × 6.9 × 1.2 in (19 × 17.5 × 3 cm)
Weight 1.5 lbs (24.5 oz)
RoHS Compliant to European Union directive 2002/95/EC
RFID made in China
Enable registration in settings - general
Compare items
  • Cameras (0)
  • Phones (0)