UHF 860-960 MHz High Performance Integrated Passive RFID Reader
UHF 860-960 MHz High Performance Integrated Passive RFID Reader
Description
Overview Integrated UHF RFID Reader
The integrated UHF RFID reader series offers an enterprise level, high performance yet low cost EPC Gen 2 RFID solution. It is ideal for commercial and industrial environments that require unobtrusive deployments with a minimum of cabling, readers and antennas. This reader supports thread safe local applications and remote applications on Windows.
Key Features Integrated UHF RFID Reader
- Cisco-certified DHCP and DNS-based configuration and firmware management, TCP/IP networking stack
- Separate read and write levels, configurable from 5 dBm to 30 dBm (1W), ±1.0 dBm accuracy
- 1 LED indicator; Opt-isolated GPIOs: 4 inputs and 4 outputs
- SSL/SSH-based security
- RoHS compliant
Technical specifications Integrated UHF RFID Reader
| Tag /transponder protocol | |
| RFID Air-interface protocol | EPC Global Gen 2 (ISO 18000-6C) with Anti-collision, DRM and advanced anti-jamming |
| RF interface | |
| Antenna connector | 1 RP TNC connector to support external mono-static antenna in addition to integrated antenna. |
| Frequency | Hop table with up to 62 entries, configurable in 50 kHz steps, accommodating the following ranges: FCC 902 to 928 MHz; ETSI 865.6 to 867.6 MHz (planned); MIC 910 to 914 MHz (planned) |
| Data/ control interface | |
| Connectors | 10/100 Base-T Ethernet interface, serial RS232 port; 12-pin screw terminal connector |
| Wireless | 802.11 b/g (optional) WEP 40-BIT AND 104-BIT KEYS; WPA and WPA2 with TKIP and AES algorithms with pre-shared keys or EAP-TLS |
| Power | |
| Power over Ethernet | Power over Ethernet 802.3 af in both modes A and B (supports 100m cable) |
| External DC power(optional) | 10 to 30 V DC supply voltage. Maximum DC power: 15 W |
| Environment | |
| Operating temp | -20 °C to 60 °C |
| Storage temp | -40 °C to 85 °C |
| Humidity | Relative humidity 0 to 90% non-condensing |
| Architecture | |
| Processor | Intel IXP420 network processor |
| DRAM memory | 64 MB |
| Flash memory | 32 MB |
| Tag buffer | 65,000 tags |
| Mercury OS features | |
| Web based applications | Configuration and monitoring from a web browser; HTTP/HTTPS |
| Protocol | Reader Query Language (RQL) and Mercury OS CAPI |
| Performance | |
| Max tag read rate | Over 190 tags/second |
| Max tag read distance | Over 30 ft (9 m) with 6 dBi antenna (36 dBm EIRP) |
| Max EPC ID length | 256 bits |
| Regulatory | |
| Regulatory | FCC 47 CFR Ch.1 Part15; industries Canada RSS-210 ETSI EN 302 208 V1.1.1 and V1.2.1 (planned); ETSI EN 300 220 V2.1.1 (planned) |
| Physical | |
| Dimensions | 26 cm (L) × 26 cm (W) × 7.6 cm (H) |
