chrispeng [ad_1]
1 Introduction
1.1 Introduction
Intervet, which has been awarded the ISO-9001 quality system certification, is a high-tech enterprise specializing in the development and production of all-in-one card system software and hardware. The Intervet card management system fully takes into account the different needs of different customers, and is more flexible in design and has ample room for expansion. Customers only need to use the Smart Manager smart card system, equipped with the latest smart card technology, to easily manage the employees’ access control, attendance, dining room consumption, salary accounting and other tasks. At the same time, they can also use the smart system to control parking lots, elevators, and security. The effective management of patrols can easily solve the problems of insufficient management staff and surge in costs. It is the safest and most efficient solution for enterprise management.
1.2 Terminology
Smart Manager: The software name of the Intervet Smart Card Management System
Cardholders: employees or consumers who hold smart IC cards
Card reader: communicate with various smart IC cards, read the card number, and display friendly information at the same time, including text, voice intercom, electronic camera, etc.; devices that need to be connected to the controller or conversion board
Access control controller: IC-CU/SD controller, as a control device for entrance and exit monitoring, access authority control and management
Elevator controller: IC-CU/LT-16 controller, as a management control device for elevator access monitoring
Parking lot controller: a control device that implements functions such as parking lot monitoring and vehicle access authority control
Consumption controller: a device that realizes the management and control of electronic wallets and consumption points by swiping cards
D4-M: A device that can read and write smart IC cards and manage the memory and keys of smart IC cards
Main controller: IC-CU/NW controller, as a hardware function platform for centralized management of various controllers and coordination of various controllers and PC communication
RS232/RS485/422 is a functional device for TCP/IP data conversion between RS232/RS485/422 and Ethernet. It belongs to use firmware to realize TCP/TP
Communication platform: a communication software system that connects hardware and software business function systems, converts RS232 and TCP/IP protocols, as a server for software and hardware network communication, belongs to the realization of TCP/IP by software
Telephone voice function: CTI technology integrating telecommunications telephone, network voice, and computer technology can realize the control and alarm function through fixed telephone, mobile telephone voice or short message
Network video: Integrate protocols such as image processing and streaming media to realize video surveillance in parking lots or surveillance sites
RS232/485/422: The international standard serial communication protocol used for the communication between PC and single-chip microcomputer
TCP/IP: An international standard communication protocol for data transmission control on an IP network and used for communication between software systems on PCs.
2 Specification requirements for the all-in-one card system
It can realize the function of “one card, one line, one library”: that is, the cardholder can use one card to have unimpeded access in all areas of the entire system (including access control, parking lot, consumption, patrol, elevator, etc.), and all kinds of terminal equipment can be used. Recognize this card, thereby facilitating the cardholder;
Network management: support unified query and statistics;
Independent design: Each subsystem can operate independently, and the operation of the subsystem will not be affected when the main control terminal is shut down or fails;
Scalability and compatibility: The system has a standard and convenient software/hardware platform interface, which can realize integration and linkage with other systems. The design fully considers future function expansion and compatibility with other related systems.
The connection between the various subsystems guarantees the reliability and safety of the system’s data transmission under the premise of ensuring standardization and independence.
Easy to maintain: When the system fails, it should be easy to judge and can be solved quickly;
The system should have a supporting card issuance system that can complete the production, issuance and authorization of cards.
The authority of the card can be controlled and changed, and the replacement of the card is carried out in the card issuing center.
The use of a visual graphical interface and a development and application operating platform is easy to operate.
2.1 Selection of IC card
The Intervet card management system adopts non-contact proximity card technology modules, including two types: read-write IC card (Mifare) and read-only ID card (HID, EMx).
-The readable and writable IC card is mainly used in a wide range of consumer areas with offline management, such as Yangchengtong, etc. It has the advantages of storing a certain amount of data, readable and writable, 32-bit serial number, ensuring that the card number is unique, and customers can Custom card number, such as 8-digit, 10-digit card
-The read-only ID card is mainly used in the field of integrated management of all-in-one cards. It has the advantages of being able to associate multiple user accounts, long reading distance, and convenient management. The serial number of the standard card ensures that the card number is unique, and the customer can customize the code. The disadvantage is that consumption cannot store data and is only suitable for networked online systems.
2.2 Card function requirements
Two major functions can be achieved by using a one-card card.
-Enterprise management function, realize the function of one card and multiple cards through identification, including access control card, work card, attendance card, patrol card, parking card, etc., realize the use of access management, attendance management and other fields, and data sharing. Standardize management, improve office and management level, and improve corporate service image.
-Electronic payment function (electronic wallet), which realizes the electronic payment function for billing within the enterprise.
2.3 Card Management
-Card making: With a professional image printer, it can print exquisite images on its special card surface to produce personalized cards.
-Card issuance: accept the cardholder’s application, write the card information in real time, and then assign the card to the applicant.
-Card loss reporting/unlinking: Report the loss of a lost smart card, which is temporarily unavailable. After the card is re-acquired, it must be unlinked before it can be used.
-Cancel the card: cancel the cardholder’s use authority, the system will invalidate the card.
-Recharge: Add the consumption amount to the smart card so that the card can be consumed on each consumer machine.
-Other functions: including card validity extension, key setting, system card creation, query printing and other functions.
3 System structure
3.1 Design overview
With the continuous development of card management functions, the awareness of the modernization of corporate management continues to increase. Due to the limitations of traditional card functions, companies often need to issue multiple cards to employees to meet management needs, such as work permits, badges, dining and consumption cards, and keys. Cards, parking factory access cards, etc., not only increase management costs, but also increase the difficulty for each employee to manage their own cards. To this end, the Smart Manager developed by Intervet integrates functions such as access control, attendance, consumption, parking lot, patrol, elevator monitoring, and salary. The powerful multi-layer user authorization method makes the system excellent in security performance. Data is processed centrally and completed on the front line, which greatly reduces the workload of various departments, improves the efficiency of enterprise management, and saves human resources.
3.2 Design principles
3.2.1 Practicability of the system: in the design of the entire network, scientific analysis of user needs, regardless of software products (operating system, database, development tools) or hardware products (host, network) should be consistent with the actual situation of users , To meet customer needs with the most reasonable investment.
3.2.2 System reliability and safety
-Software: use a reliable database, multi-check application software, and a reliable operating environment for the operating system;
-In terms of hardware: use a properly configured PC, card reading and writing equipment, reliable cards, access control attendance management equipment and network products that support TCP/IP protocol, incorporate all sensing points into the network, and perform real-time monitoring of all generated data View and track to achieve scientific management purposes.
3.2.3 The easy management and operability of the system: the system software is simple, reliable, and easy to operate. The friendly man-machine interface can help users to use it conveniently and reduce maintenance. The system is based on flowcharts, and the operation is simple and convenient.
3.2.4 The system is scalable: the entire system product is an embedded design, mature management links should be in place in one step, and the software and hardware construction modules can fully ensure that the system can be expanded. In the same system, it can have multiple functions such as access control, attendance, patrol, consumption, parking lot, salary, elevator intelligent control, etc. at the same time.
3.2.5 Strict data authorization and management: strengthen system management functions, realize strict authorization management, adopt multi-segment coding structure, support multi-dimensional data analysis and custom single-item accounting, etc., so that information resources can be used more fully and effectively, thereby becoming static management For dynamic management.
3.2.6 The design of the system engineering scheme is based on the relevant standards and specifications of different countries and regions.
3.3 System description
3.3.1 Intervet Smart Card Management System mainly realizes door access monitoring and management, elevator access control, attendance statistics of card-holder employees, consumption management of card-holder consumers, parking consumption management, patrol management, elevators Control management, salary management and real-time monitoring alarm management and many other functions. Among them, consumption can be counted consumption or calculated amount consumption. Cardholders use one card to realize all service and management functions.
3.3.2 This system can be divided or combined. Together, it can be divided into ten subsystems according to their functions, namely, one-card management center, attendance management system, access control management system, elevator management system, parking lot system, consumption system, dining system, patrol system , Electronic map monitoring system and salary management system. At the same time, it can expand and derive other functional systems according to business needs, such as: meeting, education sign-in management system, identity recognition system, WEB browser mode adopts B/S structure to apply corresponding functional systems, etc.
3.3.3 Each subsystem can run independently and be responsible for different management functions
-Access control management system, which records the user’s entry and exit, including allowing authorized persons to enter and exit the office at different times, and restricting employees to enter and exit during non-working hours. In addition, it can also collect, count, print reports on the entry and exit records of the access control machine, and use a computer Implement central management to effectively manage and control the entry and exit of employees and prevent the interference of idle personnel.
-Attendance management system, the system realizes the recording, collection, statistics, query, backup and generation of various types of attendance reports and output and printing of various attendance cards and clocks information, forming a real-time monitoring network attendance automation system, and central management through the computer , Effectively grasp and manage the attendance status of employees on time, and ensure the accuracy of salary payment based on employees’ attendance records.
-Elevator management system, the system can control different users and visitors to use the elevator to enter and exit the floor within the permitted time, reduce the misoperation of the elevator and the loss of the elevator, and greatly improve the safety and management.
-Consumption management system, the system is designed to set up consumption machines within the enterprise, so that employees can consume in various places, and adopt data through a complete consumption management software system, analyze consumption data, can clearly know the consumption situation of employees, and greatly improve This improves the convenience of consumer payment collection.
-Meal management system, special equipment is used to manage meal sales. All food gold is directly stored on the smart card. The system can set the number of meals allowed and the dining time of each employee in a day, and employees can directly consume meals according to their own dining permissions. The terminal swipes the card, and the consumption information will be uploaded to the consumer terminal and the statistical work will be completed.
-Patrol management system, under the supervision of the patrol system, security personnel conduct security patrols according to the designated patrol route and patrol time, and require patrol personnel to perform landmark check-in at the specified location and time period, and the patrol system It will be processed according to the clock-in time data, and the information will be fed back to the management personnel in time; if there is no clock-in data of the designated patrol personnel within the specified time period, the system will issue an abnormal prompt.
-Parking lot management system. The parking lot system manages the outbound and inbound charges for car owners, and charges according to the length of parking time or other methods. And by collecting in and out records, check the traffic flow in a certain period of time.
-The electronic map monitoring system is a visual monitoring software that can import floor plans provided by users, and place gates as needed. It can monitor each gate and reflect the status of each gate in real time, so that managers can understand the situation of each gate. When an abnormality occurs in the gate, the system will provide a solution when the manager checks the record. The manager can follow Solutions provided by the system to solve abnormal problems.
-Salary management system, this software can help managers use advanced information technology to quickly and accurately process complex and cumbersome data, optimize the complicated management process, provide users with meticulous and reasonable detailed design, and enable the most complex salary data entry , Modification work becomes easier.
3.3.4 The system adopts C/S three-tier software architecture, with SQL SERVER 2000 database management system as the data center, the operating end of each management system as the client, and the communication server and background running application software as the server to complete the integration Real-time communication and management of all controllers.
3.4 System network structure
3.4.1 System schematic diagram
3.4.2 The physical structure of the system: The system composes a three-tier C/S structure through the local area network, database management, and controller system, and the hardware communication connection mode is optional. The communication between the main controller and the PC can only adopt the RS232 protocol communication, and the communication with the controller is RS485.
3.4.2.1 The communication server is directly connected to the controller solution configuration
-When the communication distance between the communication server and the controller is less than 10 meters and there is only one controller, use RS232 protocol to communicate, using direct serial port connection or multi-serial port card connection;
-When the communication distance exceeds 12M, it does not exceed 1200M, and when there is no local area network in the communication area, RS422 communication can be used. If there is a LAN network interface or the management client and hardware equipment are in different buildings or far apart, it can be used Network converter connection, equipment such as MOXA DE-311, DIGI one sp.
-When the communication distance exceeds 12M and does not exceed 1200M meters, if there is no network setup, the MODEM remote dial-up communication method is adopted.
3.4.2.2 The communication server is directly connected to the main controller solution configuration
-When the communication distance between the communication server and the main controller is less than 10 meters, use RS232 protocol to communicate, using direct serial port connection or multi-serial port card connection;
-When the communication distance exceeds 12M, there is a local area network in the communication area, which can be connected by a network converter, such as MOXA DE-311, DIGI one sp. The network converter can also communicate with different connection modes of RS232 and RS485/422, the communication distance is different, please refer to the previous point;
-When the communication distance exceeds 12 meters, if there is no network setup, the MODEM remote dial-up communication method is adopted.
-Note: This solution suggests to use direct serial communication as much as possible. Communication through a network converter will be affected by the local network environment. The use of MODEM dial-up communication speed is also a problem, especially in a real-time monitoring system, it may be difficult to achieve the expected results.
3.4.2.3 The scheme configuration between the main controller and the controller is all RS485 communication, then the upper limit distance between one channel of the main controller and the last connected controller cannot exceed 1,200 meters. Of course, the shorter the communication distance, the better the effect .
3.5 System setup requirements
Because this solution adopts the Ethernet networking solution, the software interface platform of all non-contact IC card system machines and tools, and directly exchange data with the customer’s internal server through the TCP/IP protocol.
Based on the above equipment selection, the building must provide corresponding and sufficient Ethernet information nodes for the networked use of the system’s equipment. Based on the analysis of the site, we recommend the use of advanced Ethernet connection methods.
In addition, it is recommended that the user unit physically or logically partition the system and other network structures for management.
3.6 Advantages of non-contact IC card system
3.6.1 Adopt Ethernet networking solution, fast communication speed, strong real-time performance, convenient construction, adopt the most advanced Ethernet network structure in the world, communicate through TCP/IP protocol, and system equipment can directly connect to Ethernet and communicate The rate is up to 100M, and any point of the system can enjoy all the resources of the whole system in real time. Its real-time performance is much higher than other networking methods. Data transmission, exchange, sharing and remote access are extremely easy and convenient, data processing speed is fast, and action response speed is also quick.
3.6.2 Using TCP/IP communication protocol, the system can be integrated with strong ability
-All non-contact IC card system equipment software interface platform, and directly use TCP/IP protocol to exchange data with the customer’s internal server.
-Based on such a software interface platform of hardware equipment, we can directly convert all the internal human resource control flow and material control flow (card information, card information) of the enterprise into the internal management information flow of the enterprise using the TCP/IP network protocol .
-This system solution not only provides maximum protection for management software changes and upgrades, but also provides a standard application system hardware interface platform (TCP/IP protocol) for system integrators and engineering companies.
3.6.3 Convenient and flexible networking, in line with modern structured wiring requirements, excellent system scalability, and strong remote control capabilities. Since non-contact IC card products are all built-in network cards and use TCP/IP communication protocols, they can directly communicate with Various computer networks are compatible with networking, and the expansion of nodes and the expansion of terminal functions on nodes are very simple and easy. At the same time, through Ethernet networking technology, the central controller can be connected locally or away from the system through a local area network, a wide area network or a point-to-point serial link to realize remote control. And can realize multi-site sub-authority control at the same time.
3.6.4 High system reliability and stability
-All non-contact smart card system main control products adopt main control board equipment that meets international industrial control standards, and each point is equivalent to a set of industrial control equipment, with extremely high product stability.
-All equipment in the system adopts relatively distributed control. In the event of a communication failure on the network, it can still continue to work in accordance with the preset working mode. The card issuer can use it as usual. For reference. Once the fault is repaired, each network will automatically send the recorded data back to the system management center to ensure the integrity of the system information, and its safety and reliability will be greatly improved.
-The all-in-one card management system adopts a modular design, each subsystem is completely independent of each other, and will never affect each other in the event of a failure, so as to ensure that users use other non-faulty subsystems.
3.6.5 Excellent database performance and good openness: The system database adopts the standard MS SQL Sever large-scale C/S multi-user database, which can run well under Windows, and can provide general access interfaces to large databases such as Oracle and Excel standards. Import and export function of file format. This database has excellent performance and good openness. It can automatically extract card basic information from the card information database through the network and convert it into its own one-card system operation database, which can be updated at any time according to user requirements without manual input of card information.
3.6.6 Good confidentiality performance: This system provides confidentiality guarantee for the all-in-one card system from multiple aspects: it has a series of security measures such as identity authentication, node authentication, transaction data authentication, encrypted transmission, and data authentication. The system software can provide multiple levels of password protection (at least 3 levels) to manage and restrict different operators from using the central monitoring system, while preventing the system from being used by non-related personnel.
3.7 Function description
3.7.1 One Card Management Center
-As the service management center of the all-in-one card, the public parameters of other subsystems are set uniformly, and the public data of unified dispatching, calculation and statistics are unified.
-The system can realize all card management, personnel information management, overall authorization, data maintenance, consumption management and other functions.
-This system login user authority management, different users have different operation authority to use this system.
3.7.2 Access Manager (SM-2AM)
-It belongs to the traditional functional module of Intervet. It uses the security of IC card and the rewritable card number and related information to act as an electronic key to achieve access control, monitoring and management of doors and specific areas, and to achieve black Special functions such as list, anti-passback, time zone authority combination, security and fire protection linkage (requires IC-CU/NW main controller), alarm control management and other special functions.
-According to user-defined conditions, query and browse corresponding information, and generate reports, which can be printed and output as files in different formats. Facilitate the interface with other system data.
-This system login user authority management, different users have different operation authority to use this system.
3.7.3 Lift Manager (SM-2LM)
-In this subsystem, the IC card is also used as the electronic key of the elevator. This system can control the cardholder’s permission to use the elevator, time zone and elevator floor or specific area. It can also perform functional management on the various permissions of the cardholder. To expand business use, it can also be used to charge for elevator use.
-According to user-defined conditions, query and browse corresponding information, and generate reports, which can be printed and output as files in different formats. Facilitate the interface with other system data.
-This system login user authority management, different users have different operation authority to use this system.
3.7.4 Parking Manager (SM-2PK)
-Use smart IC cards as electronic keys and electronic wallets to monitor and control the entry and exit of vehicles and the management of vehicle parking. When charging, the charging management of vehicle parking can be realized, and different parking charging standards can be realized according to different models, different parking periods, and different parking users.
-On the client operating side of this functional module system, there is a business inventory of specific operators, summarizing the parking and charging conditions of the current duty.
-According to user-defined conditions, query and browse corresponding parking and charging information, and generate reports, which can be printed and output as files in different formats. Facilitate the interface with other system data.
-This system login user authority management, different users have different operation authority to use this system.
3.7.5 Consumer System POS Manager (SM-2POS)
-The IC card functions as an electronic wallet, and this subsystem can realize both counted consumption and billed consumption. Use smart IC card high security, strict encryption to protect data logic, multiple rewritable and controllable sectors, to achieve multi-point consumption, multiple consumer services, unified consumer settlement and other customer consumption management functions.
-Counting consumption: Set the cost of each different service consumption in the consumption system, and the software system automatically deducts the fixed fee for one consumption or deducts one number of times after each card swiping.
-Billing consumption: the operator enters the specific amount, and the calculation of the cardholder’s consumption amount is completed after confirmation.
-Consumption settlement: Including operator’s business settlement, which can only be applied to the consumption settlement statistics of the operator when he changes shifts. There are also overall settlement of various consumptions and unified remittances.
-According to user-defined conditions, query and browse the corresponding consumption information, and generate reports, which can be printed and output as files in different formats. Facilitate the interface with other system data.
-This system login user authority management, different users have different operation authority to use this system.
3.7.6 Patrol Manager (SM-2PM)
-Realize the electronic sign-in management of patrol personnel and enhance security measures. The system images visually arrange the patrol route, patrol group management, patrol information setting and display the patrol situation of each patrol personnel. The patrol management software system also supports online patrols. During the online patrol, the patrol situation can be displayed on the patrol map in real time, and it can be connected with the monitoring system to realize the patrol online alarm function.
-According to user-defined conditions, query and browse corresponding patrol information, and generate reports, which can be printed and output as files in different formats. Facilitate the interface with other system data.
-This system login user authority management, different users have different operation authority to use this system.
3.7.7 Attendance Manager (SS-3A)
-It can be used for the attendance management of normal shifts in companies, enterprises and other units, and it can also be used for the attendance management of multiple shifts and flexible shifts in various factories. Realize the functions of the public user attendance system with multiple rotations, multiple shifts, etc., automatic real-time statistical calculation in the background, and automatically generate a variety of attendance reports.
-According to user-defined conditions, query and browse corresponding attendance information, and generate reports, which can be printed and output as files in different formats. Facilitate the interface with other system data.
-This system login user authority management, different users have different operation authority to use this system.
3.7.8 Electronic Map Monitoring System Electronic Map (SS-2EM)
-In the form of an electronic map, visually and real-timely monitor the operating status of all controllers at each attendance access point, parking lot post point, consumption point, and patrol point. Can manage and modify whether to monitor each point of the controller. When an alarm event is detected, relevant personnel will be notified immediately in different forms. There are various forms of alarm notification, and the default is the interface image animation display and the PC speaker buzzer. The user can choose voice alarm by phone (recording can be played or text entered by the user can be played by voice), email notification, short message notification, etc.
-Users can query and browse corresponding event and alarm information.
-This system login user authority management, different users have different operation authority to use this system.
3.7.9 Payroll Manager (SM-2PR)
-Mainly deal with business employees’ salary calculation, salary distribution, expense accrual, personal income tax, etc. It is suitable for salary accounting, management and statistical analysis of various enterprises and administrative institutions.
-Arbitrary setting of salary distribution items, free definition of the calculation formula of salary items, providing “lock” function, convenient for salary entry; support for bank to pay wages on behalf of the designated bank and account number; the system also provides “tax deduction calculation” and “employees” “Social Security Management” function, and automatically generate withholding calculation formulas, and automatically calculate the withholding amount based on tax deduction standards and social security withholding standards; and automatically generate various salary reports for easy filing and reference.
3.7.10 Communication platform
-As a server for communication between each subsystem and each functional controller, it can forward data packets communicated between TCP/IP and RS232/422/485.
-There are currently two versions. One version does not have the function of recovering data. It is only responsible for forwarding communication data packets and can only be accessed directly by the controller. The other version is the version with the function of recovering data. In addition to forwarding communication data packets, it also actively recovers all punch-in records and event alarm data in the controller, and saves them in the database. This version of the communication platform can only connect to the CU-08 main controller to indirectly access the function controller. In this one-card system, the version with recovered materials is used.
3.8 System performance
3.8.1 Complete and applicable functions: One card completes the user’s automatic management of access control, attendance, and consumption. At the same time, it has a monitoring function and is convenient for customers to use.
3.8.2 Highly integrated management: The software adopts event-driven mode or navigation operation mode. Provides flexible comprehensive processing capabilities and realizes multiple functions through simple operations.
-As a communication server, the communication platform does not require too many user interface operations, just simply configure the database connection. It can serve as a channel server for the realization of multi-user and multi-task architecture.
3.8.3 Powerful retrieval function: The retrieval point is variable, and it can be retrieved in various ways to view access control, consumption, and attendance reports, as well as accurate and error-free statistical reports.
3.8.4 Friendly interface style: WINDOWS graphic image operation interface, beautiful and easy to use
3.8.5 Strong compatibility and good scalability: The system adopts a C/S network structure, with independent functional modules, low coupling and high cohesion, which facilitates the expansion of business functions and can connect functional modules arbitrarily. Functions such as meeting, education sign-in management system, and identification system can be added to this system, with enhanced functions and good compatibility.
3.9 System environment
This system can run on PC and its compatible machine, use WINDOWS operating system, database SQL server 7.0 and above.
3.9.1 System operating software environment
3.9.1.1 System software operating system
-Server: Win2K Server version, Win2003 Server, and above.
-Client: Microsoft Windows 98/2000/xp or higher.
-Browser: IE6.0 or above.
-Database: SQL Server2000 (provided by the customer)
3.9.1.2 Application software
-Including access control system, attendance system, consumer system, parking lot system, meal selling system, patrol system, etc.
3.9.2 System operating hardware environment
3.9.2.1 Network
-Local area network (server, client): support TCP/IP protocol
-WAN: VPN, DDN
-SMTP: Support mail service
-HTTP: Support hypertext link protocol
3.9.2.2 Server
Database server (dedicated)
-CPU: Xeon 2.4G or higher, front-side bus 400MHz or higher, secondary cache 512K or higher;
-Memory: 1024MB (1*1024) or more DDR 266MHz SDRAM memory;
-12 SDRAM DIMM slots, optional 512MB to 12GB1DDR ECC SDRAM, four-way interleaved Chipkill and backup memory support, which can provide strong data protection during DRAM chip errors;
-I/O slots: 6 x 64-bit/100MHz hot-plug PCI-X (800MB/sec peak bandwidth) and 1 x 32-bit/33MHz PCI;
-SCSI hard disk: 73GB (10K, BPM, 80pin), Ultra320 hard disk*3 or more, hot-swappable;
-SCSI control card: integrated dual-channel Ultra 3 (U160);
-RAID: RAID5 is recommended, and integrated RAID controller card can be used;
-Monitor, VGA, resolution above 800*600, above 16-bit color;
-Display adapter: 8M or more video memory;
-Mouse: Microsoft Mouse / Microsoft IntelliMouse / compatible device;
-Network card: dual-port Gigabit Ethernet card;
-Optical drive: 24 or more *IDE DVD;
-Operating system: Win2000 Enterprise Edition, Windows Server2003 Standard Edition and above.application server
-CPU: 1.0 G or more, front-side bus 400MHz or more, secondary cache 512K or more;
-Memory: 256MB or more, 512M is recommended;
-Hard disk: IDE hard disk above 40G;
-RAID: not used;
-Monitor, VGA, resolution above 1024*768, above 16-bit color;
-Mouse: Microsoft Mouse / Microsoft IntelliMouse / compatible device;
-Network card: 100M network card.
Each subsystem computer (PC can be used)
-CPU: 1.0 G or more, front-side bus 400MHz or more, secondary cache 512K or more;
-Memory: 256MB or more, 512M is recommended;
-Hard disk: IDE hard disk above 40G;
-RAID: Can not be used;
-Printer: 30 pages/minute or more (optional);
-Parallel printer port: 2 or use IP to connect two printers (optional);
-Monitor, VGA, resolution above 1024*768, above 16-bit color;
-Mouse: Microsoft Mouse / Microsoft IntelliMouse / compatible device;
-Network card: 10/100M adaptive network card.
Note: In the all-in-one card system architecture, each subsystem should run on an independent computer, the database server should be independent and meet the above requirements, and application servers such as 24*7 automatic recycling, communication servers, etc. also require independent operation.
For detailed plans, please contact: Intervet
[ad_2]
