Baby smart anti-theft system

Baby smart anti-theft system

System Brief

The baby smart anti-theft system uses the world’s leading RFID radio frequency identification technology to wear smart electronic tags that can emit RF radio frequency signals and are harmless to the human body. At the same time, install signal receiving devices in areas that need to be controlled in the hospital. The signal receiving device can receive the RF signal emitted by the baby’s electronic tag, and based on this, can monitor and track the baby’s location in real time. It can also promptly alert the baby’s attempted theft.

The baby intelligent anti-theft system replaces outdated human defense methods with technical defense methods, fully improves the hospital management level and management level, prevents babies from being stolen from the hospital, effectively protects the safety of babies, and protects the rights and interests of all parties.

System composition:

• Baby anti-theft label
• Exit detector
• Signal detector
• Control host (PC)

The four major system components constitute a strict security network system. With the movement of the core components, the system provides real-time alarms in areas where the core components (irreplaceable) are not allowed to move or pass or stay. Reasons and related information. It is mainly used in baby-friendly areas of hospitals, obstetrics, etc., to prevent infants from being stolen, swapped, miscarried and other incidents, to avoid medical accidents, and to protect the interests of both parties.

System advantages:

1. Active protection

All anti-theft tags send information to the control host every 10 seconds to ensure that each tag works normally and provide the greatest degree of safety protection for all babies. In particular, when a tag’s power is too low, the system can take the initiative to alert and prompt to replace the battery, without checking one by one on a regular basis, and the tag with a low battery is not allowed to be used again next time.

2. Comprehensive monitoring

Each baby anti-theft tag actively and regularly emits its unique unique ID number. The control host actively and regularly checks whether each system component is operating normally, so as to prevent the effectiveness of the system from being reduced due to equipment failures caused by various reasons.

3. Eliminate false alarms

The detection range of the exit monitor is adjustable. Can be used in conjunction with door sensor and access control system. Prevent mutual interference with other radio frequency equipment.

4. Anti-vandal design

The built-in conductive material of the wristband forms a loop to effectively prevent damage. Once the wristband is illegally damaged (such as malicious cutting) or other reasons cause the loop to break, the system immediately sends out an alarm message.

5. Unique electronic code

Each electronic label has a unique code, which will not be repeated to cause confusion. To prevent “entrainment”, babies who have not gone through the procedures for discharge will not be mixed with babies discharged normally, otherwise the system will immediately send out an alarm message.

6. Tailor-made for newborn babies

Very light and easy to wear. Detailed ergonomic design. No allergic reaction, no harm to baby’s skin. Effectively solve the problem of the wristband falling off due to the loss of water in the body after the baby is born, which leads to weight loss.

7. The system is easy to expand

The mother tag can be added for automatic matching between mother and child; it can be easily expanded to increase the positioning function of valuable equipment, fixed assets and staff; it can be integrated with the closed-circuit monitoring system to achieve integrated control.