Case of intelligent management project of floor elevator in a building in Shanghai

As my country increases the pace of economic construction in the 21st century, the development of the elevator industry that provides vertical transportation in buildings is also increasingly attracting people’s attention. In order to allow passengers to ride and use the elevator safely and happily, our company has developed this product, which effectively improves the safety and security of the building; reduces misoperation and idling; reduces the burden of elevator maintenance and saves maintenance costs; greatly improves real estate hotspots To achieve the humanization of the elevator, the use of personalized and intelligent.

In this case, it is recommended to use our company’sContactless IC CardThe elevator intelligent control system is used for management. It adopts advanced non-contact IC card reading and writing technology, automatic control technology, sensing technology, and uses a computer network platform to conduct comprehensive management of elevator use and security. The transformed elevator has excellent confidentiality and security.
For a certain period of time (such as work, holidays, and other safety-controlled periods), the building staff can only enter and exit the elevator with the IC card (the designated elevator has been set in the IC card when the card is issued), and the system automatically identifies the IC card held by the user. Effectiveness, the elevator can be operated with an IC card, and the elevator cannot be operated without an IC card, without human intervention. The same is true of how the community is used.

For visitors, temporary visits may be issued through building securityelevator cardto use the elevator.

In this way, the “dangerous” elevators that can reach all floors of the building are turned into safety elevators that provide safety barriers for users of the building; at the same time, it also plays an environmental role in saving electricity and air consumption of the elevator, and also reduces the failure of elevator buttons; The service life of the elevator; strengthens the weak side of management in the traditional safety management system; improves the safety level of the property.

The system adopts a popular open architecture, which can be compatible with any third-party system and equipment, and realizes a high degree of integration of the user’s system.

In a building in Shanghai, due to the complexity of people entering and leaving, it is difficult to achieve efficient and orderly control by a single security guard. In order to prevent illegal personnel from entering while being efficient and orderly, the authority of different personnel must be separated. Such as permanent residents and managers. Temporary and casual staff and more! And remember the in and out situation, and some places need to be controlled in real time. Corresponding personnel control entry and exit on the corresponding floor. Different floors can be managed in a unified manner. When there is an abnormal situation, it can alarm and control the access control effectively at the same time. Requirements for various complex situations.Configure the controller according to the number of floors pluscard readerand cards. JBC has carried out effective and intelligent management.

JBC2132 uses IC card to control the use of elevators. This machine can control the use of up to 32 floors. There is no need to register cards, the maximum number of card swiping records is more than 20,000, and more than 1,000 blacklist cards can be generated. A 485 communication interface is provided, and a maximum of 32 JBC2132 controllers can be connected with the 485 communication method. The floor selection switch board is in units of eight floors, and the controller board provides four-way switch board interfaces, which can be extended to the controller according to specific needs, and each switch board is powered independently. The system is used to control the use of elevators in office buildings, factories, residential areas, hotels and other buildings.

1. The communication mode 485 is optional, and the baud rate is 9600BPS.
2. The maximum number of credit card records is 24500
3. The maximum number of blacklists is 1000
4. Provide four-way switch board interface, each interface can control eight floor selection buttons.
5. Provide one output interface of Wiegand read head, compatible with Wiegand 26/34/66 transmission root

JBC306 is used forAccess ControllerAnd the induction card reading and writing equipment of the elevator floor controller.Use a set of Wiegand output interfaces to connect with the controller, you can choose to set the output Wiegand 34 (for 4-door access controller), Wiegand 66 (for elevator floor controller), which can be applied toaccess controlelevator floor controller, etc.

1. Applicable to all MIFARE ONE cards
2. Provide a set of wiegand interfaces, which can transmit card number, permissions and other information
3. Internal integrated clock chip, which can generate real-time time
4. Beep prompt
5. Power supply: DC12V/1A switching power supply
6. Working environment: 0-70℃
7. Volume: 125*125*20 (mm)
8. Weight: <300 grams
9. Color: black and white optional
9. The 6-bit DIP switch indicates the device type and the area code of the access control point
10.Blacklist processing: The blacklist is stored in the memory of the card reader and processed by different card types

Card types and functions in management

1. Mifare 1 card, support ISO1443A standard
2.Optional output wiegan66/34 serial number
3.Optional output wiegan66 output card specified sector part of the content
4.485 communication mode can be selected to output the specified sector information

1) Guest key (guest card): Use this card to open the elevator on the corresponding floor and the door of the corresponding room.
2) Staff key (staff card)
① Floor key (management card): used by internal personnel to manage floors and rooms
② Master key (super user card): With this card, you can use all floor elevators, open all room doors, and restore the relay state of the access controller after an emergency
③ Emergency key (emergency card): In case of emergency, such as fire alarm, use this normally open, normally closed floor elevator use authority, and room door.
3) Set key (set card)
①Set card 1: Set card reader sector, block, password
② Setting card 2: Time setting in public area
③ Setting card 3: Set the access control group number of the card reader
④Setting card 4: Add blacklist
⑤ Setting card 5: Delete blacklist
⑥ Setting card 6: Initialization card
⑦Setting card 7: Time setting card

Tel: 15920932285 Zhan Debi
EMAIL:[email protected]