chrispeng [ad_1]
Chapter 1 Overview
This system organically combines the use of hand-held machine with IC card for metering and counting of construction site transport dump trucks through the computer, and realizes the automatic management of smart cards. Users use smart cards to measure and form a revenue and expenditure management system. The system avoids all the drawbacks of collecting money in the process of income and expenditure, and at the same time can increase the transaction speed several times. After consumption, the computer can immediately summarize, count, and print reports for various consumption, which is convenient for the department to carry out cost accounting. The use of smart card management system greatly improves the modern management methods and corporate image.
Chapter 2 Analysis of the demand for the use of hand-held machines with IC cards for measurement and counting of dump trucks on construction sites
1. System technical requirements (design and acceptance criteria):
Because there is no electricity at the construction site, it is necessary to measure the number of transport dump trucks, use the handheld to give the supervisor on duty to manage the number of vehicle transports, and then export the data for statistics.
specific sitiuation:
1. There are a number of vehicles of different sizes and tonnages
2. Vehicles are filled with soil from several earth loading stations (such as WK600, WK700, WK800 stations), and unloaded at filling stations (such as TK600, TK700, TK800 stations) or spoil stations (such as QK600, QK700, QK800 stations) .
3. IC cards are required to identify the identities of vehicles of different sizes and tonnages (one vehicle, one card), and the vehicle will swipe the card once at the loading site (such as WK600, WK700, WK800 sites), the handset will beep once, and the display screen will display: ” The card is successfully swiped”, the handset reads the card information: license plate number, vehicle tonnage, and at the same time writes the starting point and loading time into the card, and saves all the above information in the handset to generate a record, the car filled with soil Swipe the card once at the fill site (such as TK600, TK700, TK800 site) or spoil site (such as QK600, QK700, QK800 site), then the handheld device will read the card information: license plate number, vehicle tonnage, and read at the same time Take the soil loading site (such as WK600, WK700, WK800 site) and loading time written into the card just now at the starting point, and automatically call the unit price between each pair of sites preset by the handheld and the computer system, and print the small ticket: small The ticket shows the license plate number, loading site, loading time, filling site (or spoil site), filling time (or spoiling time), unit price (amount), handheld operator number, name, and reserved driver’s signature Spaces. The card will clear this record and prepare for the next record cycle, and the handheld will generate a record.
4. The query requirements of the computer software system are based on the following keywords:
A. Borrowing site
B. Filling site
C. Spoil site
D. License plate number
E. Date
F. Unit price
G Driver’s name
Note: Simple operation required:
A. You can drive printing by swiping the card.
B. Two small tickets can be printed at the same time, one is given to the driver and the other is archived.
C. Every day or every once in a while, the company sends an administrator to the construction site with a laptop to collect data from the handheld after get off work.
D. Even if the card can be swiped normally at the loading point, the card is damaged during transportation and cannot be swiped at the unloading station, the driver can apply for a card replacement. And apply to the management center in writing to make up the data of the unloading point.
E. The computer software system and the software system on the handheld machine can be set: site name/unit price/according to the input distance (km)/automatically calculate the amount.
F. The unit price between each pair of sites will change due to the change of date.
2. User demand analysis:
1. The construction site uses several handsets with receipt printing and IC card swiping functions.
2. Set up a management center in the company office, which is mainly responsible for card management, card issuance, card cancellation, and card swiping data collection for transport dump truck drivers and management personnel cardholders. Print out the total report and the statistical report of each driver according to the card data collection every month;
3. The driver uses the card to calculate the distance/count/measure (tonnage) at the loading station and the unloading station to settle the price.
4. The front of the consumer card is marked with company name, card number and other information; the back is marked with precautions.
Chapter III Design Basis
The design standards and specifications involved in the system design mainly include:
“Smart Building Design Standard (DBJ08-47-95)”
“Commercial Building Cable Standard (EIA/TIA-569)”
“Industrial TV System Engineering Design Specification (GBJ115-87)”
“Code for Construction and Acceptance of Electrical Installation Engineering (GBJ23-90, 92)”
“Safety protection engineering procedures and requirements (GA/T75-94)” system functions
Section 1 Software Features
The system software is divided into two parts: charge management system and real-time collection system. The specific functions are as follows:
Three, communication management
Work card collection. Such as: downloading parameters, collecting data, proofreading clock, downloading list function;
Four, report management
Organize the output summary table, classification table, etc., such as: receipt and payment summary table, consumption classification table, personal summary table, personal reconciliation table, per capita statistics table, subsidy statistics table, site reconciliation table;
Five, system maintenance
With system initialization function, data transfer/recovery history record function. Specifically, it has the functions of generating subsidies, personnel files, data maintenance, data transfer, and data backup;
Six, system settings
Parameter and authority settings, such as: department, title, identity, site name, machine number parameters, password, authority, etc.;
Section 2 Hardware Function
WR0003HD handheld POS machine is a new generation of printing handheld POS machine with powerful functions, flexible and convenient use.
It is suitable for data collection and calculation processing in various highly mobile work areas. Meter reading and on-site billing of electricity, water, gas and other industries. Data collection and on-site analysis of the geology department, inventory of large warehouses and temperature collection and analysis of grain depots, parking lot management, etc.;
Chapter 6 Product Selection
1. Equipment selection:
The hardware of the consumer system consists of a card issuer, a handset and a contactless IC (M1) card:
technical parameter
Support card type:
Philips Mifare, Light and other inductive IC cards
power supply:
Take power from the PC PS/2 keyboard port or connect a dedicated 5V power adapter
Reading distance:
Power consumption:
Communication rate:
19200 bps (default), 9600 bps
Operating temperature:
0°C-40°C
Communication Interface:
RS232/RS485
Working humidity:
Relative humidity 40%-90%
Development Platform:
Provide 32-bit dynamic link library, support programming languages such as VB, VFP, PB, Dephi, VC; provide interface functions such as SCO UNIX and LINUX, provide DES encryption algorithm, and provide development routines
3. WR0003 handheld POS machine
It is a powerful, flexible and convenient new generation printing handheld POS machine.
It is suitable for data collection and calculation processing in various highly mobile work areas.
Meter reading and on-site billing of electricity, water, gas and other industries. Data collection and on-site analysis of the geology department, inventory of large warehouses and temperature collection and analysis of grain depots, parking lot management, etc.;
composition
1-Print paper slot
2-Printer paper outlet
3-Infrared communication port
4-LCD liquid crystal display
5-Rubber keyboard
6-Communication cable port
7-External power interface
8-Indicator light: green light-charger power indicator
Blue light-charging indicator light, automatically extinguishes when the battery is full
Chapter 7. Software System Interface
1. Login interface
2. System interface
3. Shipping details
4. Driver Information
5. Vehicle management
6. Site management
7. User Management
8. Price management
9. Card management
10. Data Exchange
11. Data backup
Chapter 8: RFID long-distance credit card counting system for pulling coal vehicles in open coal yard without stopping (solutions can be provided according to actual user needs)
Chapter 9 Case
1. Wuming Section of Nanwu Avenue, Nanning, Guangxi
2. Section 11 of Guangdong Qingyuan Erguang Expressway
3. Lanzhou Construction Site
4. Gaozhou Maoming Construction Site
[ad_2]
