chrispeng [ad_1]
Project Name: Dongguan Telecom Building Gate System Installation Project
Start time: March 2013
Completion time: March 2013
Software system: standard software
Hardware product: access gate
1. Equipment composition
1 Adopt patented direct drive device (high torque motor), which has high reliability and maintenance-free operation. Patented drive technology combined with a unique sinusoidal lever system for high duty cycles.
2 The direct drive system does not require any gears and clutches, so the motor is not subject to any wear and tear, and does not require any grease. is maintenance free.
3 The drive system does not generate any backlash. The motor has very low inertia, and even when switching quickly, the impact force is very low. The noise level is low, about 40dB.
4 The motor sensor precisely controls each movement, so as to accurately position the wing door (no limiter is required, the rotation of the motor is controlled by the built-in program of the control board), and the optimal acceleration and deceleration stages are determined.
5. It adopts special control panel and program, supports instant switch triggered by signal, has self-checking system such as door wing stroke and infrared sensing, and comes with LCD code display interface with numbers and letters.
6 Infrared and motor force feedback double anti-pinch.
2. Function introduction of the gate:
The entry gate is a movement method designed according to human behavior and people’s daily habits. And in the protection detection area, if the infrared detects that someone exists, the door wing will not be closed, which can effectively prevent the “jamming” phenomenon caused by the inconsistency between the opening and closing action of the door and the pedestrian’s passing direction, eliminating the possibility of pedestrians actually Damage caused: The door wing adopts a patented direct drive device (high torque motor), and the driving torque is only 120NM. If the door wing encounters a block during the opening and closing process, the door wing will automatically stop swinging and will not cause any harm to pedestrians.
3. Functions of management system
1. The personnel entry and exit vouchers can be set as monthly, quarterly, long-term, and visitor cards (temporary) according to the needs of the user; the personnel entry and exit vouchers use contactless inductive IC cards.
2 The entry and exit of personnel can be automatically classified and displayed in the form of a report.
3 All data is instantly saved to the computer hard drive. When the power is turned off, all data will not be lost.
4 Data reports can be counted and printed at any time according to the time period.
5. Managers have independent work numbers and passwords. Only when the password is used correctly can they log in to the computer for normal control and management.
6 With a blacklist function, the lost induction IC card can be entered at any time, so that it can report the loss immediately.
7 The function setting, the password setting for the hierarchical use of authority, and the production of access vouchers and other functions can only be completed by the special function card.
8 The whole system can be easily upgraded according to user requirements and form a network system.
[ad_2]
