Shenzhen Airlines VIP Hall personnel RTLS positioning system and auxiliary system case
chrispeng [ad_1]
The RTLS positioning system adopts the synchronous operation mode of the base stations in the network. As long as there are three positioning base stations in the system at the same time receiving the tag signal, the positioning calculation can be performed. In the implementation of our engineering network, we ensure that multiple base stations can receive signals and provide a variety of calculation combinations, which greatly improves the reliability of the system.
The main equipment in the RTLS positioning system has adopted various protection methods such as power short circuit and overload during circuit design, as well as the temperature measurement function of the host and the system synchronization signal detection function, and all data is transmitted back to the control center through the network to provide the operator The application of real-time monitoring further improves reliability.
The RTLS positioning system network adopts a dedicated network, which is not mixed with other local area networks to ensure the unity and reliability of its equipment.
The RTLS positioning system uses ultra-wideband pulse signals to transmit positioning information. The signal itself has strong anti-broadband and narrow-band interference capabilities. At the same time, it is particularly capable of anti-multipath fading.
The working frequency of the RTLS positioning system uses the frequency band of 3.1-10.6GHz. This signal frequency band is already much higher than the frequency of most civilian and dedicated wireless communication networks and equipment, so it is difficult for these equipment to cause interference to it.
The UWB signal transmitted by the tag of the RTLS positioning system is processed by a special modulation TH-PPM to further improve its anti-interference ability.
Shenzhen Airlines VIP Hall System
1. Personalized boarding reminder for passengers
Passengers carrying RTLS tags provided by self-exchange through gates or provided by the service desk immediately enter the Shenzhen Airlines VIP service management system. Passengers can learn their own needs through the sound and vibration reminder functions of the tags themselves.
When the passenger’s departure time from boarding is less than the set range, the system will send a boarding reminder message (vibration, sound) to the passenger, which can be set to separate vibration or sound, or to remind at the same time.
If the passenger does not leave within the set departure time, the system can quickly locate the passenger’s location, and the staff can check and remind it.
2. Location service in the passenger hall
Through the change of the position information, the software calculates and gives the person’s activity trajectory route in the lounge.
Through the location positioning of passengers, the service staff can provide accurate distribution of passengers and provide information for better location guidance of passengers.
Locate the passenger’s location information and provide guidance information for the follow-up service after the passenger leaves the hall.
The personnel positioning accuracy based on RTLS technology can reach 10-20cm.
3. “All-in-one card” for passenger consumption activities
pass throughRFIDStaff tags complete entertainment, bar and free luggage storage services.
[ad_2]
