Application case of water control integrated machine in Hunan Xiangbei Girls’ School
chrispeng [ad_1]
Brief introduction:
In the past, taking a bath was a fixed consumption, 3 yuan and 5 dimes a time, and there was a lot of waiting. The water consumption was not controlled, which greatly wasted water and electricity resources. Winter brought troublesome water use to students. After a lot of inspection and screening, the school and investors directed their goals to the Mingzu electronic water control system. After trial, it achieved good results. Students are convenient to use, use as much water as you spend, spend more and use less, do not need to pump water and do not have to wait in line, and water waste has been well controlled. Personnel management is also well utilized. School leaders are very satisfied with this plan. 10% of the students used water before, but now more than 90% of them use water, which is convenient for energy saving.
Product introduction:
This product is widely used in internal water and electricity control occasions such as campuses, enterprises, families, government agencies, such as boiling water rooms, bathhouses, apartments, self-service laundry rooms, etc., to realize electronic and intelligent transactions and settlements, and improve user management efficiency And management methods, energy saving, is the most important part of the campus, enterprise all-in-one card.
Optional models:
1. Temperature control technology.
2. Offline type and networked type.
3. Cold water type and hot water type.
Features: (all the following functions are debugged by the remote control)
1. Preferred feature: The remote control controls the function and rate of each machine (avoid the trouble of bringing dozens of function cards, one key to get it).
2. The product can be equipped with buttons or infrared sensors. Human body infrared control water supply: close to the infrared transmitter and receiver with your hand, you can choose to continue water supply or suspend water supply.
3. It adopts a fully sealed waterproof design, and the electronic control and actuators are all waterproof and sealed. It is suitable for use in high humidity and various harsh environments such as bathrooms, bathhouses, and apartments.
4. When the system encounters strong magnetic interference, illegal opening of the shell and other malicious acts, the water controller automatically shuts off the valve. Ensure that the product has higher stability and durability.
5. The integrated three-in-one design of pulse flow meter, electric valve, and card swiping charge controller; the controller will automatically shut down if man-made damage or power failure. It completely blocked the phenomenon of employees (students) stealing water and being easily vandalized.
6. It can be used in cold water and hot water environment.
7. Standby display: Standby displays the current time.
8.6 LED display, display the balance in the card, and countdown, etc.;
9. Anti-power failure function: Before the power failure, the water controller has memorized the data when it is in use. After the power failure, the data will not be lost. After the power is re-powered and the host communication is restored, the data that has not been settled during the previous use will be automatically reported for settlement to ensure that the power failure Data will not be lost after power-up.
10. Automatically adjust the valve opening size according to the water supply volume to obtain a more accurate water supply volume.
11. The installation is convenient and simple, just like installing a water meter.
12. With the flow meter, the metering method can be used to deduct the fees, so that the billing is more accurate, more scientific and more reasonable.
13. The online type has flexible setting parameters and detailed reports. You can view the consumption details, the accounts are more accurate, and the data is more detailed.
14. Both the water controller and solenoid valve (or electric valve) have voltages below 12V, which fully guarantees the safety of users.
15. It is waterproof and moisture-proof.
16. Deduction mode: (all controlled by the remote control)
Real-time deduction mode: work in real time when the card is in the sensing area, and stop working when the card is removed. When reading the card, first display the balance on the card (stay for 10 seconds), and then enter the display to display the real-time use time (seconds) of the first four digital tubes.
Withholding fee mode: When reading the card, the balance on the card is first displayed (stay for 10 seconds), and a preset amount is first deducted. Then enter the display, the first four digits show the balance on the card after withholding, and the last three digits show the withholding amount and deduct it in real time.
17. Billing method: Charge according to the flow rate used, connect an external pulse flow meter, and calculate the generated flow based on the number of pulses sent back by the pulse water meter before charging.
18. Control valve body: It supports two kinds of valve bodies, solenoid valve and electric valve. (According to user needs, two kinds of valve bodies can be switched)
19. Multiple consumption modes: (all controlled by the remote control)
A. Real-time fee deduction mode: when the card is in the sensor, the water will be discharged and the fee will be deducted in real time (this mode is limited to one channel).
B. Withholding fee mode: The first time the card is read, an amount is withheld, and the faucet discharges and deducts the amount withheld. After the deduction, the water is stopped. C. Pay-per-use: water is output once per swipe (the water output can be set), and the number of swipes per day or one can be limited.
20. Support multiple independent wallets, personal recharge wallets and corporate subsidy wallets.
The system defaults to deduct the subsidy wallet first, and the personal wallet will be deducted after the subsidy wallet amount is deducted. Discount consumption can be set.
21. You can set 4 periods of water use, and you will not be allowed to swipe your card for consumption during non-use time.
22. It is possible to limit the maximum water consumption time or water consumption of each card every day or every month.
23. The data collection method adopts real-time networking, which is conducive to real-time monitoring and query of data.
The networking methods used are: 433, 232, 485, GPRS, etc.
[ad_2]
