chrispeng [ad_1]
At present, almost all anti-theft alarm systems used in smart communities are the “factory settings” of the community. After the developers have built their houses, they will install the anti-theft alarm systems through engineers and integrators. The owner does not have the right to understand and choose the anti-theft alarm system. The anti-theft alarm system is more of a face project for developers to enhance the selling point and added value of the community. After the community was handed over to the owners for use, the developers had already slapped their backs and left. They basically ignored whether the system was up and running and whether it was operating normally.
Application status of home anti-theft alarm
The choice of the anti-theft alarm system lies with the developer and the integrator, and the end user is the owner. This separation of purchase and use causes buyers to be indifferent to the quality and stability of the system and later services, and users lack the necessary requirements for the system. learn. It can be said that it is basically useless, and the products that were bought at a large price have almost become cherished collections on the shelf.
The anti-theft alarm system is often sold and used as an industrial product. The product has a high degree of specialization, complicated operation, and cumbersome applications such as remembering passwords and programming. For many people with less education or older people, the correct use is compared. difficulty. Even for a long time, there is no host with a Chinese operating interface in the world. The products of most manufacturers directly copy the Western programming operating mode, and Westerners are accustomed to using complex programming modes, even the menus are in English. These are obviously not in line with the Chinese cultural habits. The complicated operation makes users daunting, and it is expected that they are not satisfied.
In some smart communities that have installed an anti-theft alarm system but not activated, the owners’ feedback on the system is basically the same—too troublesome: remembering the password, arming and disarming, it’s painful and laborious. Every time I go home, pressing the “disarm” button on the operating console and setting a password is exhausting. If an outsider enters and does not enter the password in time to unlock, the siren will beep for a long time, “It’s annoying!” and some are connected. The system of the community guard office rang for a long time but no guard came to inspect it, and it did not have the desired effect at all. The guards are also full of bitterness: too many false alarms, and their warnings of “the wolf is coming” have been numb.
In fact, as an anti-theft alarm system in a general intelligent community, its technology has long been mature, and it is also widely used in our daily lives. The embarrassment of the anti-theft alarm system is also a consequence of the insufficient popularization of the anti-theft alarm concept in the entire industry. Unlike terminal electronic consumer products, anti-theft alarm is indeed a highly professional industry. From the sales link to the purchase and use link, it is an industry behavior, and the end consumer knows very little!
Anti-theft alarm technology application case
In general households, the two balconies and the main entrance of the bedroom and the living room are the most vulnerable to intrusion, followed by the windows of the kitchen and the study (because the study and the kitchen are usually unoccupied, especially at night, they are generally vacant, and we usually don’t have them. The habit of closing the kitchen windows is easy to become the entrance of thieves; again is the master bedroom, children’s room and bathroom;
At this point, we have already had a good idea of the areas that need to be guarded, and at the same time, we have also determined the priority of the guarded areas.
Determine the defense area and the prevention methods and equipment for each defense area
After knowing the locations and areas that are vulnerable to intrusion, you should determine the number of defense points based on your surrounding environment, community security measures, home environment and other factors, as well as your financial situation (of course, it is best to fully defense all vulnerable areas). Here, we temporarily take the defense of all the above areas as an example to carry out various anti-theft equipment configurations. You can increase or decrease related equipment according to your specific situation. Here, we use the products produced by Dongguan Lepu Electronic Technology Co., Ltd. Take the Lion King LEPU-2000CS luxury eight-zone wireless dial-up alarm as an example:
Main functions of LEPU-2000CS luxury eight-defense zone wireless dialing alarm
When someone enters the fortified area, the system can implement the on-site siren alarm according to the mode preset by the owner, and automatically dial the pre-set 1-6 groups of telephone numbers to alarm.
1. The system can record and play voice, and the information will not be lost after the power is off. When the alarm is triggered, the pre-recorded alarm voice information can be heard from the alarm phone;
2. The system can actively monitor live sound remotely;
3. The system can be deployed/disarmed in different places;
4. The system can scroll the code, and increase/decrease the configuration of the detector at will. This is more user-friendly, simpler and more reliable than the current code-interpolating alarms;
5. The system can grab the line and alarm. When the alarm is triggered, no matter whether the phone connected to the alarm host is off-hook or busy, the line will be automatically hung up, giving priority to the alarm;
6. The system has a disconnection (cutting) alarm function: when the telephone line is damaged or damaged by other reasons, the main unit will emit a “di, di, di” prompt tone every 1 minute in the disarmed state, and in the armed state , The siren will sound continuously when the disconnection alarm is turned on;
7. The system has a power-off protection function. When the mains line is damaged or the power is cut off due to other reasons, the system’s backup power supply can still continue to work for more than 24 hours (actual test), and it will be automatically charged after the power is received;
8. The system has a state memory function. When the mains power is lost or the backup power is exhausted and the power is turned on again, the system will still maintain the state set before the power loss;
9. The system has lightning protection function;
10. The siren sounding time can be set arbitrarily between 1-20 minutes, which is very user-friendly;
11. The system is wireless transmission, eliminating the trouble of wiring and arranging cables;
12. Eight defense zones with full keyboard, home/outing defense options, can be armed/disarmed through the keyboard;
In this example family, install one wireless curtain infrared each on the windows of the children’s room, master bedroom, and living room, one infrared detector in the study, and one door sensor on the windows of the door, study, kitchen, and bathroom. In this way, we have completed a basic home anti-theft system and installed dual detection equipment in key defense areas (gates, study rooms).
Anti-theft alarm technology application case 2
How to solve the problem of applying the smart anti-theft system in the home anti-theft application of the owner’s home defense?
Determine the scope of prevention according to the room situation:
The 2 balconies and the door are in the most vulnerable position; the windows of the kitchen and the study room are the second place (because the study room and the kitchen are usually> no one, especially at night, they are generally vacant, and we usually do not have the habit of closing the kitchen windows. It is easy to become the entrance of thieves); again is the master bedroom ①, children’s room ② and bathroom ③;
At this point, we have had a good idea of the areas that need to be guarded, and at the same time, we have also determined the priority of the guarded area (in the figure, the intrusion location is represented by the priority of prevention)
Determine the defense area and the prevention methods and equipment for each defense area
After knowing the locations and areas that are vulnerable to intrusion, you should determine the number of defense points based on your surrounding environment, community security measures, home environment and other factors, as well as your financial situation (of course, it is best to fully defense all vulnerable areas). Here, we temporarily take the defense of all the above areas as an example to carry out various anti-theft equipment configurations. You can add or remove related equipment according to your specific situation:
Standard configuration (JD-X305):
The disadvantage of using an economical host is that if you walk indoors, you will also trigger an alarm. To solve this problem, you need to choose a host with a distinction between home arming and outing arming. Let’s take JD-X305 as an example, in the children’s room and the master bedroom. , Living room, install one wireless curtain infrared each, add one infrared detector to the study, install one door magnet on the windows of the door, study, kitchen, and bathroom, so that we have completed a basic home anti-theft system At the same time, dual detection equipment is installed in key defense areas (gates, study rooms). The equipment is as follows:
1 JD-X305 host, 3 wireless curtain infrared, 1 infrared detector, 4 door sensors
Basic configuration can realize functions:
In the daytime, use “Outdoor Arming” at this time all the detectors are in alert status, and at night when there are people in the house, use “At Home Arming”, then the indoor detectors such as the infrared in the study room will not work. The system will beep when the door, study, kitchen, and bathroom doors and windows are opened, pried, etc., and the door or window sash is displaced by more than 1 cm, or if a human body enters from the balcony, children’s room, or study in a fortified state. The siren alarms, and automatically cyclically dials the pre-set 1-6 groups of telephones to alarm, and can accurately know the alarm location through the display of the eight defense zones on the panel.
Concluding remarks
In order to make China’s anti-theft alarm industry achieve greater development, in addition to product intelligence and simplicity, a more important method is to launch a revolution to penetrate the terminal civilian market. In this way, the anti-theft alarm industry can truly escort the living of the majority of residents, and can truly carry out thousands of households.
[ad_2]
