chrispeng [ad_1]
Turck Group is a German manufacturer of industrial automation control products. In order to more easily control various machines running in the production process, Turck introduced RFIDsystem.
BLident is a mold RFID system that can be applied to a variety of machines.Regardless of whether it is a stamping machine on an automatic assembly line, a conveying system, or a chocolate manufacturing system, it can be controlled by BLident. The BLident system uses RFID tags and readers that support the ISO 15693 standard high frequency (13.56 MHz).
Turck’s BLident system uses 13.56 MHz RFID tags and readers to control factory machinery.
The remote input and output system (I/O system) of the Turck plant is managed by a central programmable logic controller.Since each slice or receiver of the input and output system isIt must be programmed to conform to a specific production process and machine, and managing the I/O system becomes a tricky thing.
If the correct program is not downloaded to the receiver, the production process may be out of joint or the machine may be damaged or unable to run. Mark, Turck’s RFID system product supervisor DiSera said.After the introduction of the RFID system, place the RFID tag on the product or horizontal tool, and the I/O slice containing the RFID reader reads the unique ID number of the tag. The ID number is in the back-end system and the correspondingThe machine running process is connected. If the ID number of the tag matches the machine or a certain operation process, the system starts the machine and starts production.
The application of RFID tags in automated production is becoming more and more popular, DiSera said. Labels are gradually replacing barcodes in manufacturing applications. “In production, barcodes are easy to be paintedMaterial coverage, making it impossible to read, making the I/O system unable to judge the next production process. “He said, “The RFID tag can prevent this from happening.
Germany’s Behr (Behr) is a leading international company specializing in the production and supply of automotive temperature management systems. The group also started adopting BLident this month
RFID system, which is applied to four sets of machines that produce air-conditioning evaporators. “These four sets of machines can perform the same operation and manufacture 15 kinds of molds. Because of the Behr product lineMore and more, it is difficult to control which mold is matched with which product. If you misplace the mold, you may damage the machine or assemble the wrong parts. Behr needs oneCard failure safety protection device to ensure the correctness of the mold.
The Behr BLident system has been running well, and the distance between the reader and the tag is about 1.5 inches. If there is an error or invalid reading, the system will display a prompt message, blockingStop the operation of the machine. Currently, Behr likes this system very much and they plan to expand the application further. “
[ad_2]
