chrispeng [ad_1]
Large energy-consuming enterprises, mines, and warehouses have a large number of material transportation vehicles entering and leaving every day, requiring procedures such as parking, registration, and weighing. The data is manually entered into the computer by the operator, which is not only time-consuming, but also has a large error rate. In addition, it is also easy It breeds man-made fraud and causes a lot of economic losses to the enterprise.
The vehicle management RFID weighing system can effectively solve the disadvantages of the above traditional weighing methods. The vehicles to be measured all carry “electronic license plates”—that is, radio frequency tags (TAG). When the vehicles are weighed, the special reading equipment will automatically recognize the electronic License plate. And the electronic license plate cannot be removed once installed (to solve the “clone car” problem). Write the weighing mark in the electronic license plate to solve the problem of “repetitive weighing”. The dedicated reader can be integrated with the original weighing system into a complete system to realize the integration of automatic measurement and automatic vehicle number recognition, completely avoiding manual operation and high efficiency.
System Features:
?1. All over-balanced vehicles are automatically recorded by the computer for “electronic license plates”, eliminating manual intervention
?2. Once the electronic license plate is installed, it cannot be removed.
? 3. Electronic license plate data cannot be forged or copied, which fundamentally eliminates copying, forgery, and cheating.
? 4. The dedicated electronic license plate can withstand the test of damp, cold, hot and other harsh environments.
? 5. “Electronic license plate” adopts passive technology, with long service life and no maintenance.
6. Fully guarantee the reading distance; the recognition distance is more than 7 meters, and the adaptable vehicle speed can be as high as 80km/h.
RFID solutions for automatic verification of customs electronic gates:
The customs is the bridge and link connecting the domestic and overseas countries. The daily traffic volume of customs gates is large, which easily causes the gates to be blocked, affects the efficiency of customs clearance, and brings troubles to the customs management.
The RFID system for automatic verification and release of customs electronic gates is composed of remote readers and tamper-proof electronic tags, which can realize automatic identification and recording of vehicles and drivers, and can be integrated and combined with customs electronic systems and EDI electronic customs clearance information platforms. Automatically check the customs declaration data with the driver and vehicle information, eliminating the need for manual registration, review, and acceptance procedures, greatly improving the speed of customs clearance.
System design goals:
1. Establish an intelligent bayonet system, install a lane signal light electronic shift lever release control and instruction system, a driver’s RFDI electronic tag vehicle management subsystem, a weighbridge data mining subsystem, and an electronic bayonet data real-time processing system. Carry out all-round supervision of vehicles entering and leaving the port area, and provide effective electronic data support for the classification of vehicles.
2. Install the lane signal light and electronic gear lever system, and control the lift of the gear lever and traffic lights by receiving the comparison instructions from the bayonet management system to achieve the purpose of instructing the vehicle to let go.
3. Install the RFDI electronic tag driver’s vehicle management subsystem, issue driver electronic tag cards to vehicles entering the port area, pre-enter the basic information of the vehicle and the driver, read the data at the bayonet, and compare with the system at the same time .
4. Install the platform scale RFDI read-write data acquisition system to collect the weighing data of vehicles entering and exiting the bayonet, and calculate the weight of the cargo entering the port area
5. Through the electronic bayonet data real-time processing system, all bayonet devices are integrated, and data interaction is carried out with the customs supervision business system.
system framework:
The container channel management system includes: electronic license plate automatic recognition system, traffic light electronic gear lever control system, weighbridge data acquisition system, bayonet integrated management system.
[ad_2]
