chrispeng [ad_1]
1. Project background
With the development of the economy and the increase in per capita income, people’s living standards are getting better and better, and there are more and more vehicles such as private cars and trucks. In response to the increase in vehicles, driving schools must have new ways or intelligent procedures to assess drivers.
In the past, the entire driver test was done manually. When it was time to test which item was to be tested, the staff would directly command them to know what the next test would be. This wasted a lot of manpower and material resources, and brought to the driver too. A lot of inconvenience.
In response to the above problems, our company has launched a 2.4G long-distanceRadio frequency card“Driving school examination system” solution.
2. Brief description of the system:
1. Hardware and software composition
Electronic label: ML-T60 electronic label card, the distance can reach 2-80M. Installed on a high pole beside the road.
Card reader: The ML-T2000 card reader produced by Mulan is used to read the information of the label and is a fixed card reader. Installed in the car, the information is read through the antenna outside the car, and it is directly connected to the computer through the serial line.
Computer: Management process.
2. Working principle
620)this.style.width=620;” border=0>
Install the ML-T60 active electronics on the high pole beside the road. Its working mode is active. It constantly transmits information to the outside. When the driving school comes, the card reader can pass the antenna at a long distance. The card information is automatically recognized, and the card reader transmits the card information to the computer in the car. Through the software system and the location is specified in advance, the system will issue instructions. The driver knows through the computer that the test for this distance is over. What will be tested for a certain distance. All information is displayed on the display screen. The whole process is all intelligent.
Base station field model
620)this.style.width=620;” border=0>
3. Product introduction:
Long distance: easy to achieve within 10 meters of reading distance. Due to the actual situation of the attendance location, the card reading distance can be set.
Stable operation: The active card has a stable reading distance and is not easily affected by the surrounding environment. Using channel isolation technology, multiple devices do not interfere with each other;
Support high-speed mobile reading: The identification card can move at a speed of up to 200 km/h.
High reliability: it can operate normally within the ambient temperature of -40℃-85℃ (MTBF≥70000 hours), especially in the low temperature in the north and high temperature in the south, it has more advantages, and it can effectively resist high dust and dust in the air in harsh environments. The normal use of equipment can be ensured in environments such as pollutants and rainy weather.
Encrypted calculation and authentication to ensure data security and prevent link eavesdropping and data cracking;
High anti-interference and lightning protection design: There are no special requirements for various interference sources on site, meeting the requirements of the industrial environment, and the installation is convenient and simple.
There is no need to apply for and pay for the ISM microwave frequency band that is open worldwide.
Ultra-low power consumption: long service life, low average cost, and it is safer and healthier for the human body without radiation damage. Configurable microwave module working mode, adjustable transmission power;
Multi-identification: It can identify more than 200 signs at the same time. If there are more than 200 signs on the spot, we have a way to deal with it.
4. Product technical parameters
1. Active proximity card ML-T80/ML-T60
620)this.style.width=620;” border=0>
620)this.style.width=620;” border=0>
2. Reader (card reader) 2.4G card reader series
620)this.style.width=620;” border=0>
620)this.style.width=620;” border=0>
5. Counting management software interface: (omitted)
6. Product photos:
620)this.style.width=620;” border=0>
620)this.style.width=620;” border=0>
7. Contact us:
Marketing Department: 13338005482
Contact: Qiang Dinglong
Fax: 0512-87655879
QQ: 1055936919
MSN:[email protected]
E-mail:[email protected]
Website:http://www.mlrfid.com
Add: Room 505, Building 1, Chuangye Building, No. 625, Binhe Road, High-tech Zone, Suzhou
8. After-sales service:
Suzhou Mulan Electronics Co., Ltd. promises to
1. Lifetime maintenance is free and technical guidance is provided. Once a failure occurs, the equipment can be quickly replaced; if it exceeds one year, the corresponding cost will be charged.
2. Help to solve the fault within 7 working days (in case of force majeure factors can be negotiated); provide remote technical guidance within one working day after receiving the repair request;
3. The overall construction period of the system can be completed within 30 working days
4. If you are not satisfied with the current system, we can tailor products for you with short cycle, low price and good quality.
9. Copyright Statement
The copyright of this technical solution belongs to Suzhou Mulan Electronic Technology Co., Ltd. Without written permission, no institution or individual may quote it in any form, otherwise Suzhou Mulan Electronic Technology Co., Ltd. reserves the right to pursue legal responsibility. Hope to cooperate sincerely!
[ad_2]
