chrispeng [ad_1]
1.Smart swing gateIntroduction
The intelligent swing gate is an intelligent channel management equipment that has been carefully developed, researched and produced for many years. It is a high-tech product mainly for intelligent management of personnel channels. It can be easily compatible with the use of IC card, ID card and other card-reading identification equipment, providing a civilized and orderly way for entering and exiting personnel, and effectively managing personnel entry and exit. It can be widely used in stations, wharfs, subways, factories, buildings, smart communities, hotels, clubs, enterprises and institutions, etc., where intelligent management of channels is required.
The equipment organically integrates mechanical, electronic control and identification technology. By matching various ICs, ID identification system equipment, and adopting reliable safety protection devices, alarm devices, direction indicators, etc., it can coordinate to achieve channel intelligence Control and management, etc.
JBC8400Smart swing gateThe basic composition:
2.Smart swing gateFunctions and features
Smart swing gateFeatures
1) With fault self-checking and alarm prompt function, it is convenient for users to maintain and use;
2) Anti-pinch and anti-bumping function, when the swing arm is in the process of resetting, the motor will automatically stop working within the specified time, and reset again after the default delay (until the reset), and the force is very small;
3) Anti-shock function, the swing arm is automatically locked when it does not receive the opening signal;
4) The swing arm can be adjusted synchronously (for double pendulum situation);
5) With automatic reset function, after the gate is opened, the system will automatically cancel the user’s permission to pass this time if it does not pass within the specified time;
6) Normally open or normally closed can be adjusted freely to meet the requirements of different venues;
7) One-way and two-way pendulum function, which can control the entry and exit of personnel in one or two directions;
8) Remote control and management can be realized directly through the management computer;
9) Delayed automatic reset, the standard is automatic reset 5 seconds after opening;
10) The swing arm automatically swings open when the power is turned off, and automatically closes when the power is turned on, which meets the fire protection requirements.
Smart swing gateFeatures
Convenient and fast: read card in and out. With an authorized IC card, as long as the card is successfully swiped, the opening and release of the wing gate and the recording of charges can be completed. The card reading is non-directional, and the reading and writing time is 0.1 second, which is convenient and fast.
Security and confidentiality: The communication between the IC card and the IC card reader adopts triple authentication technology to confirm each other, digital technology, key algorithm, and authorized issuance, that is, the IC card can only be used in this system and is safe and confidential.
Reliability: IC card radio frequency induction, stable and reliable, with its own judgment and detection capabilities.
Flexibility: The system can flexibly set the access control personnel authority, time period control, the validity of the cardholder, blacklist reporting of loss, and additional card functions.
Versatility: through authorization, the user card can be used for parking, attendance, access control, patrol, consumption and other “one card” management, easily realize one card for multiple uses.
Simplicity: easy installation, simple wiring, full Chinese interface of the software, convenient operation
3.Smart swing gatestructure
Smart swing gatecomposition
The product is mainly composed of a cabinet and a circuit control system
Box
The box body is mainly composed of a chassis and a movement. The chassis is equipped with a card reading device, a direction indicating device, an infrared sensor device, and a chassis door and lock. The movement consists of a motor, a reducer, a transmission and a swing brake. As shown below:
Circuit control system
The main components and functional parameters (see Appendix A for each part of the interface description) The circuit control system is mainly composed of card readers, main controllers, infrared sensors, motor drive circuits, direction indicating devices, limit switches, etc. The main functional parameters are as follows:
Card reader (JBC206):
The card information is read from the IC/ID card by radio frequency, and the control signal is output after being processed and confirmed by the main controller. Use +12VDC power supply to read Wiegand card number.
Main controller (JBC7101):
The control center of the entire system, after processing the received card reader signals, infrared sensor signals, limit switch signals, etc., gives control signals to the direction indicator board, motor drive circuit and buzzer output control.
JBC7101 and PC adopt TCP/IP communication mode;
4 Each card reader interface, an external +12V card reader, can be connected to a card reader in weigand26-42 format;
Provide two RS232 and RS485 communication methods, which can be connected to barcode scanners, fingerprint readers, magnetic card readers, RS232 or RS485 card readers, and expand to communicate with the host computer.
Provide 12-channel level input interface, each interface adopts photoelectric isolation;
Provide 9-way triode open-collector output, which can drive relays and other equipment, each output interface adopts voltage transient protection, and provides high-brightness LED status detection;
The device has a self-checking function, and 5 LED indicators show the running status of the device
Infrared sensor:
Detect the position of passers-by in the channel, +12VDC power supply, output has two states of high level and high resistance.
Power management:
Provide power supply for all equipment, AC220V input, and provide 12V/24V two sets of output, large-capacity backup battery.
Smart swing gateSystem composition and principle
Smart swing gateSystem composition
Single channel system: consists of two single gates as shown in the figure below:
Multi-channel system: consists of two single turnstiles and multiple turnstiles as shown in the figure below:
Smart swing gateHow the system works
After the system is powered on for 3 seconds, it resets and enters the working state.
According to the directions on both sides, the personnel swipe the card on the card reader. When the card reader receives the card swiping signal, the signal is transmitted to the main controller.
The main controller receives the legal swipe signal and the infrared signal, and transmits the control signal to the direction display circuit and the motor control circuit through the drive control circuit, so that the direction display in the middle changes to the green correct direction indicator, and rotates the motor Personnel can pass smoothly until the signal of in-position open is detected.
Through the infrared beam monitoring in the channel, the position of the passer-by in the channel is detected, and the direction display keeps prompting corresponding instructions until the person completely passes through the channel.
When it detects that the person has passed completely, the main controller sends a signal to turn the motor back to the off state until it detects the close in place signal.
If the passerby forgets to swipe the card or is not a valid user card, the system will immediately drive the alarm information gate and will not open until there is a legal information; during the pass, the passer enters and then returns, then the infrared beam will not be detected If the personnel have passed the information completely, the equipment will automatically close the gate within the set waiting time and respond to the alarm message.
Smart swing gateDefinition of system access
Authorized access: personnel can only be allowed to enter by swiping a valid user card on the card reader
Free passage: personnel can enter at will as long as they follow the instructions, no credit card verification is required
No passage: no one is allowed to enter
Entry: the direction from the outside to the controlled area of the equipment
Exit: the direction from the controlled area of the equipment to the outside (as shown below)
Smart swing gateThe working mode of the system
The system has 9 working modes to choose from, and the corresponding parameters can be issued through PC software:
Entry and exit authorization
Enter authorized passage, free passage
Entry is authorized, exit is prohibited
Free passage in and out
Free passage in, authorized passage out
Free passage in, no passage out
No entry or exit
Entry is forbidden, and exit is authorized
No entry, free passage
Smart swing gateOther functional modes of the system
In addition to the above 9 working modes to choose from, the system also has the following functional modes to be set:
Maximum waiting time for personnel to pass through the passage
Set the ID and name of the channel device
Set the IP address of the device
Remotely reset the device
Set the display mode of the direction display
Set the alarm duration of the device
Remotely clear the alarm signal
Registered mode and non-registered mode
4. Standard technical parameters of intelligent swing gate
◇Chassis material: domestic standard 304 stainless steel, thickness 1.5MM
◇Chassis size: 1200 length * 280 width * 1000 height (MM) (standard)
◇Swing arm length: 600-900mm
◇Weight: 80Kg
◇Swing arm transmission angle: 180 degrees
◇Swing direction: one-way or two-way
◇Working voltage: AC220 ±10% V/50 ±10% HZ
◇Drive motor: DC brush motor 200W/24V
◇Input interface: dry contact signal or 12V level signal or 12V pulse signal with pulse width ≥100ms, drive current ≥10mA
◇Communication interface: RJ45
◇LED indicator light: 1 card reading window: 2
◇Passing speed: 30-40 people/minute (normally open), 25-30 people/minute (normally closed)
◇Sluice opening and closing time: 1-2 seconds
◇The time required to enter the pass state after power-on: 3 seconds
◇Automatic reset time after failure: 10 seconds
◇Working environment: indoor and outdoor (shaded shed)
◇Temperature: -10℃—— 50℃ Relative humidity: ≤90%, non-condensing
5. Scope of application of smart swing gate:
◎Import and export channel management of stations, wharfs and tourist attractions
◎Management of ticket inspection channels for exhibitions, swimming pools, etc.
◎Import and export attendance, access control, consumption management of factories, buildings, smart communities, hotels, clubs, enterprises and institutions
[ad_2]
