Anti-theft alarm management system for automatic inventory of guns in military unit warehouses
chrispeng [ad_1]
1. System significance
In military units, the management of guns in the warehouse is a very important task, which is directly related to social security and safety and stability. In daily work, the warehouse needs to count the number of guns in real time. At the same time, it also needs to perform strict registration and statistics on the entry and exit of the guns. The entry and exit of the guns and the use of guns by related staff must be recorded in In addition, we must strictly prevent firearms from theft. The maturity and popular application of RFID technology makes automatic inventory and anti-theft management of guns simple and feasible.
2. System architecture and program description
The automatic inventory anti-theft alarm management system for military unit warehouse guns is based on the recent incidents of gun seizures and police assaults that occurred in certain military units. A security system developed based on technology, monitoring technology, communication technology, and RTLS real-time positioning technology. The system has the following characteristics: automatic inventory of gun warehouses, gun anti-theft alarm, event recording, disarming and arming, tracking and positioning, wide practicability, and strong anti-interference.
2.1 System architecture
Figure 1 System network architecture
2.2 Program description
General guns in the army are stored in special metal cabinets. Generally, 10 95 rifles are used as a cabinet. We install UHF electronic tags on each gun, and then install a UHF antenna in each cabinet, usually 4 Each cabinet is a group, just use a four-channel reader. The reader/writer antenna of each cabinet is always reading the label on the gun, and uploading the data to the management host through the 4-channel reader and writer at all times. The management host has a set of management software developed by our company. In this way, we can monitor the guns in each gun cabinet in real time.
If someone needs to get a gun, they need to apply first. After the application is approved, they can get the gun, and record the person and time of the gun in the software; if the gun is used without permission, the system will send an alarm signal.
The above picture shows the equipment installed at the door of each gun storeroom. When the gun passes the door, it is recognized by the identification device at the door. If the application is passed, the alarm will not be reported; if it is not passed, the system will alarm.
Figure 3 Partial view of the gun cabinet
Figure four 95 rifle
[ad_2]
