chrispeng [ad_1]
one.Project Background
At present, the maintenance of cables and telecom unmanned base stations in the telecommunications industry mainly relies on manual daily inspections, and manual daily inspections have the following defects:
1) Whether the inspectors make inspections on time according to requirements;
2) The manager cannot know the real time when the inspector arrives at the inspection location;
3) Manually fill in the inspection report, some inspectors are perfunctory, and the reliability is poor;
4) The results of inspections cannot be counted, inquired and reported in time.
two.System Overview
1. System Introduction
Using RFID, GPS, GIS, GPRS, mobile communication and other technologies, management tools for the inspection of cables and base station facilities. This system can well solve some inconveniences and shortcomings in the current inspection management work, and greatly improve the quality and efficiency of management.
The entire telecommunications inspection program makes full use of the public communication network for GPS personnel positioning and geographic information query. The GPS intelligent terminal receives positioning data from satellites and calculates the coordinates of its geographic location. After processing, it is matched with the electronic map on the system map client, and the coordinates are displayed on the map to clearly and intuitively grasp the dynamic location information of the personnel.
At the same time, the system provides a series of base station inspection plans. In addition to the management of the inspections in place, the specific work content of the line inspection can be uploaded, recorded, saved in real time, and the data can be automatically analyzed and mined. Make statistics and analysis on the operating status and usage of the cable, and finally make auxiliary decisions for the maintenance and replacement of the cable.
2. System principle
The system is composed of GPS mobile terminal and system management platform using GPRS network to form a real-time inspection management system. Personnel carry RFID handheld terminals during inspections, and automatically send location information to the management center through the GPRS network. If a cable failure is found, it can be recorded in the terminal and sent back to the system management platform via the GPRS network. When additional facilities need to be inspected, Working status and operating parameters can also be transmitted back to the system management platform in the same way. The system management platform will automatically make statistics, analyze and evaluate the location information of personnel, cable faults, facility status and parameters.
3. System composition
Mobile smart terminal:
main feature:
1) Highly integrated: RFID, GPS, and 3G communication modules are integrated together
2) Support industry software customization and secondary development
3) Integrated mobile operating system
II System Management Platform
Real-time positioning of personnel
Patrol track playback
Scheduling function
Data backup and printing
three.System functions
The system automatically summarizes and saves the on-site inspection information, equipment operation data, and complete analysis reports, so that managers can easily obtain the true and complete implementation of the inspection plan in the first time, with scientific and information management The mode manages inspection work and inspection personnel, ensuring the quality of inspection work in production facilities.
Function module realization function description
GPS real-time positioning module, real-time positioning of personnel, query the current location of inspectors on the map
GPS trajectory playback module personnel motion trajectory playback displays the motion trajectory of inspectors in a specific time period on the map
System setting module patrol inspection plan preparation Set patrol cycle and time for different positions and production devices
Equipment operating parameter type setting Set corresponding operating parameters and events to be collected for various devices
Normal equipment operation parameter setting Set the normal operation parameter range of various equipment
User permissions are set for users to set different levels of permissions
Report design design query the data items displayed in the report
The inspection comparison module compares the actual inspection with the plan compares the actual inspection with the plan and compares the actual inspection with the plan to obtain abnormal differences in the inspection
Data release of other functional modules release data through the network in a C/S manner
Remote maintenance to remotely maintain the system through the network
Detailed introduction of system function modules:
1. Display or lock tracking of the current position of all inspectors or a single inspector in the GIS map
2. Personnel inspection track playback
Play back the patrol track of all patrol personnel or designated patrol personnel within the set time
3. Comparison of inspection plans
According to the inspection plan or inspection requirements, automatically compare the pipeline ancillary facilities or pipelines inspected to determine whether the inspection is qualified or automatically screen out the facilities that are not inspected as planned
4. Equipment operation and status report
Automatically analyze the pipeline status and working parameters of auxiliary facilities during each inspection, and perform various analyses according to management requirements, including defect analysis, failure statistics, historical parameter analysis, etc.
Contact: Ren Gong
139 1153 3725
[email protected]
Q: 479 017 087
[ad_2]
