chrispeng [ad_1]
From a global perspective, the application of RFID technology in the medical industry has become more and more extensive, which has played a role in saving labor, improving the work efficiency of medical staff, effectively preventing medical accidents caused by operating errors, saving medical costs, and increasing safety.
The application of RFID in the medical and healthcare industry can be summarized into the following areas: access security management, medical equipment tracking, patient flow management, patient safety management, and staff identification.
(1) Management of valuable medical equipment
620)this.style.width=620;” border=0>
Each valuable device is attached with an active electronic tag, which can store basic device information and track the device in real time through the tag.
(2) Personnel identification and positioning management
1. The RFID system can track patients, doctors, and nurses in the hospital in real time. Wearing a wrist tag on a person’s wrist allows continuous tracking of their location.
620)this.style.width=620;” border=0>
Wrist tag base station
2. The above application can also be combined with the access control function to ensure that only authorized personnel can enter the key areas of the hospital, such as restricting unauthorized personnel from entering pharmacies, pediatrics and other high-risk areas.
620)this.style.width=620;” border=0>
Sound and light alarm controller
3. The wrist tag also has an anti-disassembly function to prevent the tag worn by the patient from being illegally disassembled or damaged.
4. In case of emergency, the patient can call through the emergency button on the label.
(3) Hardware composition
(1) 2.4GHz active configuration label
Active configuration tags can not only realize remote identification and positioning, but also increase the parameter configuration function. The user can modify the radio frequency signal transmission interval through the configurator, and can also switch the tag work/sleep state, thereby greatly extending the battery life. Effectively solve the life-neck bottle faced by active tags.
620)this.style.width=620;” border=0>
620)this.style.width=620;” border=0>
Performance parameter
Transmission distance: 2～50 meters
Working frequency: 2.4GHz-2.5GHz ISM microwave range
Working mode: read-write type
Configuration function: a, work/sleep mode conversion; b, radio frequency signal transmission interval modification
RF power: 0dBm
Working current: 6uA, 3V
Modulation mode: GFSK
Communication rate: 1Mbps
Anti-conflict: can recognize 100 cards at the same time
Service life: 3~4 years or more
Dimensions: 90*31*11mm
(2) Wrist type active electronic tag
Wrist active tag is a new type tag specially designed for RFID personnel management system. The wristband is made of special materials and the design is simple, so any wearer will feel very comfortable. In addition, the label is waterproof and anti-disassembly function, in addition to the management of ordinary personnel, it can also be used for supervision of special people, such as mental patients or prison inmates. The wrist tag battery can also be replaced, successfully breaking through the life-span bottle of the active tag.
620)this.style.width=620;” border=0>
Performance parameter
Transmission distance: 15 meters
Working frequency: 2.4GHz-2.5GHz ISM microwave range
RF power: 0dBm
Working current: <10uA, 3V
Modulation mode: GFSK
Communication rate: 1Mbps
Anti-collision: can identify 100 tags at the same time
Working mode: read-only
Service life: 1~2 years or more
(3) 2.4GHz gain controllable reader
Gain controllable reader adopts advanced 0.18um CMOS circuit, low cost and high density; active RFID reader can also be used in flammable and explosive occasions, such as gas stations, chemical plants, due to its low power consumption characteristics Wait. The reader interface is diversified, suitable for various radio frequency identification schemes, and can also carry out various network layouts. The antenna is an omnidirectional design, which can identify and track targets in all directions. Users can adjust the recognition distance of the reader according to actual needs to make the recognition range more accurate.
620)this.style.width=620;” border=0>
Performance parameter
Identification method: omnidirectional identification, standard λ/4 rubber whip antenna
Recognition distance: adjustable from 2 to 50 meters, which can reduce the maximum reading range
Working frequency: 2.4GHz-2.5GHz ISM microwave range
RF power: 0dBm
Receiving sensitivity: -90dBm
Working current: 100mA, 9V
Modulation mode: GFSK
Working mode: direct mode/buffered mode
Buffer capacity: 100 latest Tag data
Communication rate: 1Mbps
Anti-conflict: can recognize 100 cards at the same time
Interface mode: support multiple interfaces, RS232/485, TCP/IP, WI-FI
Working temperature: -10～70 ℃
Moisture resistance: 90% (non-condensing)
Dimensions: 126*104*28mm
(4) RFID sound and light alarm reader
In addition to the basic functions of a TCP/IP reader, the RFID sound and light alarm reader has a blacklist alarm function; the sound alarm is built-in, and the optical alarm is external. The antenna is an omnidirectional design, which can identify the target in all directions, identify its identity, and determine its scope of activity. RFID sound and light alarms have great advantages in personnel control and occasions requiring alarm control.
620)this.style.width=620;” border=0>
Performance parameter
Unique function: sound and light alarm
Identification method: omnidirectional identification, standard λ/4 rubber whip antenna
Recognition distance: 2~50 meters adjustable, you can adjust the reading range
Working frequency: 2.4GHz-2.5GHz ISM microwave range
RF power: 0dBm
Receiving sensitivity: -90dBm
Working current: 100mA, 9V
Modulation mode: GFSK
Working mode: direct mode/buffer mode; the alarm has a reset function to stop the alarm.
Buffer capacity: 100 latest Tag data, alarm blacklist capacity is 300 tag IDs
Blacklist capacity: up to 300
Communication rate: 1Mbps
Anti-conflict: can recognize 100 cards at the same time
Interface mode: TCP/IP
Working temperature: -10~70 ℃
Moisture resistance: 90% (non-condensing)
Dimensions: reader part, 126*104*28mm alarm part, 160.5mm *80.5mm *55mm
Shenzhen Bisha Technology Co., Ltd.
Phone: 755 86069613
Fax: 755 86069649
Address: Room 816, Block F, Xihai Mingzhu Building, No. 1 Taoyuan Road, Nanshan District, Shenzhen
Post Code: 518052
Website: http://www.bisatech.com
E-mail: [email protected]
[ad_2]
