RFID-based intelligent management of electronic tags in the fire protection industry
chrispeng [ad_1]
The use of electronic tags in the fire protection industry
Management status
The management of fire extinguishers from leaving the factory, daily inspections to repairing and scrapping mainly focuses on maintenance and inspection, and these two aspects must be specific to each different fire extinguisher.
(1) Maintenance
Maintenance is mainly to check the storage environment of the fire extinguisher, such as avoiding upside-down, rain, exposure, strong radiation and contact with corrosive substances, and the place where the fire extinguisher is placed. Keep dry and ventilated to prevent the cylinder from being corroded by moisture. A good environment for storing fire extinguishers can be maintained under normal climatic conditions.
(2) Inspection
Inspection is the most important task. The security department inspects the condition of fire extinguishers at least quarterly. The inspection content includes: the implementation of the maintenance responsibilities of the responsible person, whether the pressure value of the fire extinguisher is within the normal pressure range, whether the safety pin and lead seal are intact, placed firmly, and there is no buried pressure, the fire extinguisher Whether it is within the validity period, etc., the effective status of the fire extinguisher should be checked into a “fire extinguisher inspection record” and archived for verification.
Current management problems
At present, most security offices still manage fire extinguishers mainly by manual inspection and manual records. The inspection records are archived in paper format. Unexpected situations discovered during the inspection, such as the fire extinguisher has been turned on, insufficient weight, insufficient air pressure, etc. , Fill in the form separately to record, and after recording, it is easy to confuse the fire extinguisher, because the appearance of the fire extinguisher has a certain similarity and is not easy to distinguish. In an emergency or when you need to check the specific information of a fire extinguisher, it is often impossible to obtain the relevant information of the fire extinguisher in time. When investigating the responsibility, the responsible person is often unclear. The loss of a certain fire extinguisher information will affect it. Many fire extinguishers are managed, and every time a fire extinguisher is replaced, there are more problems. If the production date of the fire extinguisher is accumulated and ambiguous, it is difficult to know whether it needs to be repaired or expired. When the fire management department makes an inspection, even if it can barely see it, the date must be calculated, and the inspection and supervision efficiency is low. The fire management department is unable to supervise in place, and can only occasionally check certain companies. Fire extinguishers are out of date or should be sent for repair and cannot be supervised in time.
Application requirements of electronic tags
The core of the electronic label is the RFID chip. Each chip has its own “ID card”: the only digital code in the world, and this digital code has been solidified in the chip during factory production and cannot be changed. Based on this feature , Each fire extinguisher can be uniquely identified by an electronic tag or label, and bind the production date, manufacturer, repair, whether it should be repaired or scrapped, etc., which is clear at a glance and conforms to the development background of the Internet of Things. The computerized management of fire extinguishers through electronic tags overcomes the large number of fire extinguishers that require tedious and backward manual maintenance, inspection and recording. The fire management department can supervise and inspect the fire extinguishers that should be repaired, expired, or scrapped in real time through the system, and standardize the market manage.
Fire extinguisher electronic label intelligent management system
The main purpose of the fire-fighting companies to seal fire extinguishers and other fire-fighting equipment is to standardize the market management of fire extinguishers and prevent the sale of illegal, expired or unqualified fire extinguishers.
Fire extinguishers, especially companies, schools, and factories with a large number of fire extinguishers, realize computerized management. At the same time, it is convenient for local fire brigades to monitor the fire safety of the entire city and the inspection and supervision of fire extinguishers.
System composition: electronic label + handset + background management system
Main features of the system: inspection and supervision
Main functions of the system: label storage, requisition, review, sealing, inspection, invalidation, data synchronization, etc.
System flow chart
System flow chart
Please contact for detailed plan
Shenzhen Xiangzhi Intelligent Technology Co., Ltd.
Address: 13th Floor, Block B, Honglong Plaza, Baomin Road, Baoan, Shenzhen
Phone: 13570856187
Phone: 0755-29960950
Fax:0755-27750895
[ad_2]
