chrispeng [ad_1]
1. Demand analysis
The application of environmental monitoring sensors in large-scale production workshops, squares, warehouses, etc. is increasing, especially the two data monitoring of temperature and humidity is the most typical, followed by the display of detection data and the generation of a unified monitoring system . However, the current temperature and humidity monitoring and management methods still have some problems:
The traditional temperature and humidity management is in a manual and semi-manual state, and the efficiency is very low, and the collected information cannot be fed back to the management system in time;
The traditional collection technical indicators are low and the accuracy is not enough;
Traditional temperature and humidity management methods are prone to disconnection between monitoring and management, delays in timing, and improper handling of abnormal events;
In addition, the lack of a clear graphical management interface is also a drawback of traditional management methods.
Based on the above problems, Shaanxi Fiberhome has launched a set of temperature and humidity intelligent monitoring and management system with efficient management and easy operation. This system can implement informationized and centralized control and management of temperature and humidity in various environments, which is a set of reasonable and functional systems. Complete temperature and humidity management system with optimized process and scientific monitoring.
2. System introduction
The system adopts a networked architecture, which is suitable for a single monitoring site and can also meet the networked monitoring of multiple monitoring sites. And use timing temperature and humidity acquisition, radio frequency wireless transmission and other technologies, combined with intelligent alarm means, automatically alarm the high and low limits of temperature and humidity in the warehouse, and realize the refined temperature and humidity management.
Three, system function
The system can realize real-time detection of the temperature and humidity of the warehouse to ensure that the warehouse maintains a suitable temperature and humidity environment to ensure the quality of the storage materials is intact. According to the content of the signal recognized by the reading and writing device, the current temperature and humidity of the warehouse is confirmed. When the temperature and humidity are abnormal, the system will quickly alarm and prompt the hidden danger area. The staff can use the handheld to detect the temperature and humidity conditions in the storage system on site, and quickly find the problem site based on the data information, so as to realize the application of temperature and humidity monitoring in warehousing logistics.
The specific functions of the system are shown in the figure below:
Four, system characteristics
The networked system architecture adapts to a variety of scenarios.
Wireless sensor network technology, information collection is flexible and changeable.
Graphical display interface, intuitive and simple, clear at a glance.
Intelligent management system, flexible setting and quick operation.
The deployment does not require power and data cables, and the construction is convenient and simple.
Five, system deployment renderings
Six, application value
The application of this system can effectively promote the construction of the ability to accurately manage the temperature and humidity of the monitoring site, enabling the site to realize the fine management of temperature and humidity, the collected data information is more accurate and reliable, and it has a higher temperature and humidity intelligent management capability; at the same time , The system implements standardized management, grasps the temperature and humidity information of each monitoring point in time, and has the ability to assist decision-making on the on-site temperature and humidity control, and improves the ability of event early warning analysis and disposal.
[ad_2]
