chrispeng [ad_1]
In order to achieve precise management of jewelry, it is necessary to locate a single jewelry. In this system, the RFID electronic tag has a unique ID number. Therefore, after the electronic tag is one-to-one corresponding to the individual jewelry, the identification of the electronic tag can be achieved. The goal of precise jewelry management. At the same time, RFID equipment has the feature of simultaneous reading of multiple tags, so the construction of this system can realize fast and accurate inventory of goods and realize efficient management of jewelry assets.
This system penetrates deeply into each key node of jewelry assets from warehousing, sales, inventory, and sales, and combines computer and network technology to realize the informatization, precision and efficient management of jewelry assets. The basic network diagram is as follows:
Introducing RFID technology into jewelry management, attaching RFID tags to valuable jewelry products, using automatic identification equipment to monitor, control and track labeled jewelry, to achieve rapid inventory, real-time tracking and sales management intelligence. In this way, the all-round tracking and recording of the entry and exit of jewelry products and the sales process are carried out, and the cumbersome and inefficient manual management and bar code scanning mode are replaced with new methods of automation and accuracy and efficiency.
System business process plan
The construction of this system integrates RFID technology into all links from the storage of goods to the completion of sales.
From the issuance of the card at the time of initial warehousing, the launch of the card after the card issuance, the safety monitoring during sales, to the inventory check of the goods, to the final settlement and supply replenishment, RFID technology will string together the entire business chain to complete the jewelry asset management process. Accurate, efficient, information management and tracking.
1 Card issuing system
After the jewels are purchased, electronic tags are installed for each jewel. The packaging of the electronic tag is specially designed for jewelry products, which can be easily and simply hung on the jewelry without affecting the appearance of the jewelry, and at the same time, it can only represent a jewelry. In this link, a card issuer is used to write the electronic product code (EPC) of the jewelry and other data information into the corresponding electronic tag, and upload it to the application center server to realize the binding of the RFID electronic tag and the jewelry asset.
2 Safety monitoring system
This subsystem provides monitoring and early warning for the safety of jewelry on sale.
After the products are issued, they can be displayed on the counter. After all the products are placed in the display area, the staff will start the “commodity on the shelf” process at the management computer.
Under each display counter, RFID equipment will be installed concealedly, including RFID antennas and RFID fixed readers. The number of antennas is selected according to the size of the jewelry display area. Up to four antennas are supported, which can realize the entire jewelry display area. There is no dead angle in the range to read. After the goods on the shelf process is started, the reader starts to work, scans and uploads the product information of each counter to the computer, the staff can check the information, if there is no error, then “complete the shelf”, after that, the reader starts to enter the jewelry safety monitoring state . The staff can flexibly configure the allowable warning time through the software according to the actual situation of the sales work. During the warning time, the system will not detect the jewelry label but will not give an alarm. Once the warning time is exceeded, the system will activate the alarm device.
Under safe conditions, the RFID reader can read the information of each jewelry electronic tag on the counter through the antenna. Once there is an unexpected situation, the reader will not be able to read the information of a certain tag within a certain period of time, and it will pass through the system The alarm device gives the staff an alarm.
At the same time, in order to cope with the situation that the jewelry cannot be returned to the counter within the warning time due to long-term consultation or viewing by some customers, the staff can use the handheld device to read the electronic jewelry of the jewelry when the system alarm time is approaching or the system has been alarmed. Tag, and choose to extend the warning time on the handheld device software, the system will suspend the alarm and start a new warning time.
Such a system function setting will monitor the safety of jewelry to the greatest extent and at the same time affect the normal development of sales to the minimum.
[ad_2]
