chrispeng [ad_1]
In key areas such as exhibitions, buildings, warehouses, military bases, etc., all dynamic and static targets in a specific area (including personnel, vehicles, equipment, important materials, facilities, etc.) can be tracked and monitored all-weather visualized in the entire region. Through the construction of a visual positioning tracking monitoring platform in the computer room, based on the vector electronic map of the control area, the integrated real-time monitoring of the location, trajectory, status, alarm, and real-time tracking of the designated target is integrated and real-time.
Everything is under control to ensure the efficient, accurate and timely command in normal and emergency situations; make the safety precaution level in various important safety places reach a new height; greatly improve the response ability to respond to emergencies, Command ability, dispatch ability, and support ability; make a qualitative leap in the construction and management of various important safety sites. Under the new situation, use innovative technologies and concepts to respond to various challenges, showing high-tech, informatization, and Fully modern management level.
1. Improve the accuracy of counting
2. Save time and improve efficiency, which is good for management and personnel
3. Reduce economic losses caused by human factors
4. The system configuration has functions such as automatic card issuance, voice prompts, LED screen display, etc. (optional)
1. System composition:
The VIP positioning management system consists of two parts: software and hardware, including identification card readers, transmission equipment, communication servers and related software. The most important part of the hardware is all card readers and identification tags. The software is installed on the computer dedicated to monitoring and management in the management center. The management software is used to set up the system and manage the card issuance authorization, and view the objects of each channel. And pass time; defense zone alarm situation, etc., and carry out relevant real-time control or set process control goals.
2. Design ideas:
1. In each room that needs to be positioned, or at the center of an outdoor area that needs to be positioned, (for example, on a pole, or on other buildings at a certain height from the ground), install a read-write locator (the size of a walkman) ), each read-write locator has a location number corresponding to its site or outdoor positioning area; the signal collection range of each locator installed in the room is bounded by the entire room and installed outdoors The signal acquisition range of the locator can be controlled within a fixed range centered on the locator, and the size of this range can be adjusted by the user by wireless means.
These locators are responsible for collecting the code signals of people or assets in the exhibition hall or area under its control, and transmit the collected code numbers and related information to the central data collector through the long-distance wireless transmitter in the locator, and finally It is transmitted to the computer in the control center through a wireless or wired network connected to the data collector in the center. In addition to periodically collecting the code numbers of personnel and assets, the read-write locator can also collect other sensor signals or alarm signals at the same time, and at the same time transmit the instructions of the control center to the read-write locator, and other terminal equipment, such as information display devices , Broadcast speakers, etc. Both the read-write locator and the central data collector have a small communication power supply, which can be directly powered by 220V.
2. In the entire control and management range, use the central data collector as a network node to form a wireless local area network (this network can generally cover a range of several kilometers), through this network, each read and write locator and other terminal equipment and control The central computers are connected together. It transmits various signals collected from each read-write locator to the control center computer, and transmits various instructions issued by the control center to the read-write locator, and other information display or broadcast equipment. In addition, every security guard carries a handheld PDA similar to a mobile phone, which can be used for more convenient patrols.
3. Every VIP member has an electronic label (card) with a unique number. When necessary, this label can also have a button. Through the button, the terminal module can pass the reading and writing locator near it to the control management center. Send a call alarm signal, through the position number of the read-write locator, and other related position information (such as call power information), we can also determine the location of the moving target.
4. Working principle diagram:
System schematic diagram
3. System functions, features and advantages
1. System function
When VIPs enter the lobby to visit, the system will make corresponding records.
When the VIP passes through each area with a card reader, the system will make corresponding records.
The system provides the global positioning of each VIP and displays it on the electronic map of the building.
The system provides the function of locating and querying the VIP, and you can locate the VIP by entering the relevant information of the VIP.
The system single-point card reader can support 200 VIP users to pass through at the same time.
The system software provides a background basic data maintenance module, which is managed by a dedicated person.
The system can analyze historical data.
The system provides the function of displaying the working status and connection status of each card reader.
The system provides the functions of writing, modifying, and effective label cards.
The system provides an interface integrated with video surveillance, which can be easily integrated and displayed with the existing video surveillance system.
Entity renderings
[ad_2]
