chrispeng [ad_1]
1. Market background
With the continuous improvement of China’s social security system, important progress has been made in the standardized application of social security cards. The Ministry of Labor and Social Security requested that after two years of hard work in 2008 and 2009, the provincial level of pension insurance should be implemented in all provinces across the country. In this way, the flow of personnel, the continuation and transfer of the relationship of the old-age insurance relationship in the province can be realized, and the “all-in-one card” of the social security card can be realized in the province. However, due to the relatively large regional differences in the degree of informatization in the social security field, the issuance of social security cards was mainly based on prefectures and cities. Although the Ministry of Social and Labor Security formulated and announced the corresponding technical specifications for social security IC cards many years ago, However, the actual situation in many places in the region is not considering the issue of social security cards in accordance with the standards issued by the ministry, resulting in the current social security cards with more media, including paper cards, magnetic cards, barcode cards, memory cards and CPU cards, which has caused the realization of provincial-level overall planning A certain difficulty. Therefore, it is imperative to upgrade the social security information system of various cities and cities with the province as the unit and replace the issuance of social security cards that meet the standards issued by the ministry.
2. The development of social security card-making technology and the problems it faces
In the early days, the printing of personalization information on the surface of the social security card and the writing of chip information were all completed through integrated equipment imported from abroad. The advantage of this type of certification is that the personalization information and chip information are completed on the same device. The consistency of information can be maintained. But its shortcomings are also very obvious. The first is that the speed of card production is very slow. Take the most advanced model of a well-known international brand personalization device as an example. Its sublimation color photo printing module can print 550 color photos per hour at the fastest. The maximum resolution of the image can only reach 300dpi; secondly, the cost of this equipment certification remains high, not to mention the purchase cost of millions of equipment, the life of the print head is only a mere 50,000, and the consumption of printing ribbons is also It’s amazing, and the after-sales service of foreign manufacturers is also an expensive expense.
With the development of printing technology, in recent years, a brand-new printing technology-digital printing has been introduced into the card making field. About one-tenth of the printing speed), fast (large sheets of card-making materials can be printed at the same time), exquisite printing (printing image resolution can reach 1000dpi or more), good surface wear resistance (the surface is covered with a transparent protective film after printing) fast It has won the favor of customers and quickly applied to the production process of various cards.
Digital printing technology has solved all kinds of problems of social security card surface printing, but new problems have arisen at the historic moment, and once made many card companies unable to do anything. After the adoption of digital printing technology, the personalization of the surface of the social security card and the personalization of the chip have been split into two separate processes. The new question is: how to ensure that the personalization information on the surface is printed first and the personalization of the chip written later Consistency of chemical information? In desperation, many places use the tactics of crowds, train workers to look at the surface information of the card one by one, and then find the personal information corresponding to the surface information from the database and write the social security card chip through the reader. This method undoubtedly increases The labor intensity of workers, and there is a risk of errors and omissions due to human negligence. For this reason, the social security card issuance system proposed by Xiongdi Technology will provide you with a complete solution.
Third, the solution to the issuance of Xiongdi Technology Social Security Card
Shenzhen Xiongdi Technology Development Co., Ltd. is a high-tech enterprise in Shenzhen. It has been committed to the research and development of various smart card peripherals and card issuing systems for many years and has achieved certain results, especially the quality of the second-generation ID card independently developed by our company. The inspection, issuance, and sorting system has been widely used in public security certification centers in more than 30 provinces and cities across the country, and more than 120 sets have been sold. The cumulative number of second-generation ID cards issued through our system has exceeded 600 million. Xiongdi has gathered many years of experience in the second-generation certificate issuance system and investigated the needs and characteristics of the social security industry to formulate the following solutions:
Option 1: Centralized card issuance in the provincial center
The provincial center centralized card issuance means that the personal information of the card chip and the key are written in the provincial center at one time. The advantage of this method is that the key is stored in the provincial certificate center to avoid errors in key transmission and data leakage. In addition, the card is issued. The cycle is shorter.
The centralized issuance of social security cards generally requires three steps:
In the first step, the social security card completes the encapsulation of the card and the printing of public and personal information on the surface of the card at the card factory;
In the second step, the encapsulated and printed social security card is delivered to the provincial social security center, and the provincial social security center centrally writes the key and personal information of the social security card into the chip to complete the initialization and personalization of the card chip;
In the third step, the Provincial Social Security Center distributes the initialized and personalized social security cards to all cities and counties.
620)this.style.width=620;” border=0>
Figure 1. Flow chart of centralized card issuance
Introduction of Xiongdi Technology Social Security Card Centralized Issuing System:
620)this.style.width=620;” border=0>
Figure 2. Appearance of JC-8200 card issuing device
The social security card issuance system of Xiongdi Technology is based on the JC-8200 issuance equipment platform independently developed by Xiongdi Technology. It uses advanced OCR recognition technology to identify the card number printed on the surface of the social security card, and then queries the insured person corresponding to the card number from the database through the card number The personal information and public information are written into the social security card chip through an industrial-grade IC card reader to ensure that the personalization information printed on the surface of the social security card is consistent with the personalization information of the chip.
Features of the equipment:
1. Up to 10 contact IC card workstations can work at the same time, greatly improving the card issuance speed;
2. OCR recognition technology can accurately read the card surface information, and the recognition rate can reach more than 99.8%;
3. Using multi-threading technology, the system running speed>2500 sheets/hour;
4. Modular design, each component has independence, it is easy to realize adding functional components, changing the order of components, and low coupling between components.
5. Redundant design, easy to install laser etching module, magnetic stripe reading and writing module, non-contact IC card reading and writing module, etc., to meet the special needs of users such as composite card issuance.
620)this.style.width=620;” border=0>
Figure 3 Internal structure diagram of JC-8200 card issuing device
Option 2: Decentralized issuance of cards, unified pre-personalization of provincial centers, and individualized methods of each city
The advantage of the decentralized card issuance method is that it can realize the independent and individual needs of each city, especially the one-card multi-purpose processing mode, and fully meet the business and safety requirements of the provincial social security center and the social security center of each city.
Distributed card issuance step 1: The provincial center uses the JC-8200 card issuance device without the OCR identification module to initialize and pre-personalize the social security card, and then distribute the social security card to the city where it belongs.
Distributed card issuance step 2: The municipal social security card center uses Xiongdi Technology JC-6200AL medium-sized personalization equipment to identify the card number printed on the surface of the social security card through the OCR module, and then query the individual insured person corresponding to the card number from the database through the card number Information, and write the social security card chip through the IC card reader, so as to ensure that the personalization information printed on the surface of the social security card is consistent with the personalization information of the chip.
620)this.style.width=620;” border=0>
Figure 4 JC-6200AL card issuing device
Features of JC-6200AL:
1. 1-3 contact IC card workstations and magnetic stripe readers are optional, and non-contact readers can be additionally installed;
2. OCR recognition technology can accurately read the card surface information, and the recognition rate can reach more than 99.8%;
3. System operating speed>1500 sheets/hour;
4. With sorting function, up to 12 sorting slots, convenient for the issuance of social security cards.
Other auxiliary equipment:
1. JC-6200CL sorting machine: The JC-6200CL ID card sorting system is developed by our company and is a specialized equipment for solving the post-processing of ID cards. The equipment is used online with a computer, adopts an integrated design of light, machine, and electricity, reads the relevant information in the ID card through the IC card reader, and automatically classifies and sorts according to the definition. This system greatly improves work efficiency and work quality, and is an indispensable intelligent professional sorting equipment in the process of production and issuance of ID cards. The equipment has been widely used in the production of second-generation ID cards.
620)this.style.width=620;” border=0>
Figure 5 JC-6200CL sorter
technical parameter:
Card issuing slot capacity: 300 sheets
Speed: 1200 sheets/hour
Communication interface: RS232
Suitable card size: 86 mm (length) 54mm (width) 0.5~1.2mm (thickness)
2. JC-3200A card counting machine: This equipment adopts scientific logic analysis circuit and high-quality photoelectric components, with unique design and exquisite manufacturing; two independent calculation circuits automatically scan and verify each other, which can accurately count more than 0.45mm Cards of different materials; Large LCD window display, the maximum accumulation can reach 9,999 cards; Card counting speed: 500 cards/4S.
620)this.style.width=620;” border=0>
Figure 6 JC-3200A card counting machine
Fourth, the conclusion
As a supplier of professional card issuance systems and equipment, Xiongdi Technology has provided more than 30 public security certification centers across the country, Beijing Metro Ticketing Center, Nanjing Public IC Card Co., Ltd., Shenzhen Shenzhen Tong Co., Ltd., and Shaanxi Provincial Expressway Networking Toll Center, Shanxi Expressway Networked Toll Center, Henan Expressway Networked Toll Center, Tianjin Expressway Networked Toll Center, Chongqing Expressway Networked Toll Center, Qingdao City Expressway Administration, Sichuan Provincial Expressway Networked Toll Center, Jiangsu Province The expressway network toll center, Jiangxi expressway network toll center and other units have built card issuance systems or supplied related equipment. They have accumulated very rich project experience and can meet various individual needs of customers. The company adheres to the policy of “manufacturing every product and serving every user well”, and is determined to provide services that exceed customer expectations!
[ad_2]
