chrispeng [ad_1]
In addition to the wide application of Shengyang long-distance electronic tags in the rapid customs clearance system of vehicles, it also has a wide range of application prospects in the rapid barrier-free passage system for personnel. Different from the traditional access control system which uses the short-distance card reading channel system, the personnel entry and exit management system using remote personnel identification is a more advanced, more humane and safer management method.
Traditional personnel management methods
The traditional method of identifying internal personnel is that each person wears a badge with a photo of himself and written his name and number, etc. When entering the safe passage, the inspector manually checks the information to determine whether the person is legal. The electronic access control does not require a person to check, but the person who enters and exits swipes the card on the card reader, and the controller replaces the manual inspection. Regardless of whether a manual or intelligent system is used, all personnel are required to provide the badge to the inspector or shake it in front of the card reader, the electronic door lock opens, and the passer opens the door manually. If it is a channel with frequent entry and exit, if the passer-by carries a lot of items, it will cause great inconvenience to passer-by and affect the speed of passage.
Advanced personnel barrier-free fast-track system
The new generation of barrier-free fast-track system uses long-distance electronic tag recognizer and automatic door opener, which does not require any operation by passers and does not form obstacles. Use the RF1000/1100 long-distance card reader to replace the traditional short-distance card reader, and by adding an electronic door opening mechanism, a fast-track system without physical obstacles can be realized. It can not only facilitate the rapid passage of personnel, but also prevent the illegal passage of unauthorized personnel.
The system includes: automatic door opener, channel controller, RF10001100 remote electronic tag reader and corresponding personnel electronic tag. Each person wears an electronic tag card on his chest. When the person is near the channel (1.5-3 meters), the induction antenna installed on the side of the channel receives the signal from the induction card and transmits it to the card reader. To the card number of the card and pass it to the nearby channel controller. The controller judges the legality of the card. If the card is legal, it outputs a door open relay signal to drive the automatic door opener to open; if the card is illegal, it outputs an alarm relay signal. The channel controller can also communicate with the host computer management host, by taking pictures and archiving the images of people entering and exiting.
|
|
Traditional personnel access(Access control)system |
Fast track without barriers(Access control)system |
|
Adopting technology |
Radio frequency technology |
Radio frequency technology |
|
Access door control |
mechanical+Manual |
Fully automatic |
|
Install |
Need to clearly indicate the area where the user reads the card |
Can be installed concealed |
|
Reading distance |
10-15cm |
1-10rice |
|
Need to swipe the card in the card reader |
Yes, you need to pause and swipe your card on the card reader |
No, there is no need to pause, the card reader can recognize remotely |
|
Need to open the door manually |
Yes, manual sliding door is required |
No, fully automatic |
|
Technology maturity |
Mature |
Mature |
|
System price |
Low |
high |
|
Use environment |
Ordinary occasions, low security level, few passers-by, and low speed requirements |
High-end and special environment, high security level, large number of passers-by, high speed requirements |
|
Ease of use |
Inconvenient: need to pause, need to free hand to swipe the card and sliding door |
Convenient, barrier-free passage, no operation by passers |
[ad_2]
