chrispeng [ad_1]
For many families, the focus of life is the children, because the children are pinned on the hope of the family.But at the same time, there are still some lawbreakers in the society. For various purposes, they repeatedly extend their evil hands to thosecute child. The incidents of theft and wrong holding of babies have brought great harm to the society and brought disastrous consequences to the hospital and their families.
Infant anti-theft system (also known as “baby security system”), by installing signal receiving devices and exit monitors in the hospital monitoring area, and wearing electronic tags that can send RF signals and are harmless to the human body to achieve safe monitoringFeatures. The signal receiving device can receive the RF signal sent by the baby’s electronic tag at any time, and judge the safety status of the baby based on this signal, so as to realize the timely alarm and tracking of the attempted theft of the baby.Ruiying baby anti-theft system adopts advancedTechnical means have replaced outdated air defense methods, thoroughly upgraded the baby anti-theft system, improved the hospital’s management level and management level, and fundamentally prevented the baby from being stolen from the hospital, and at the same time prevented the baby from being hugged and effectively protected the baby.Children’s safety, to protect the rights and interests of all parties.
Figure 1 Rexense baby anti-theft system architecture diagram
Baby anti-theft system composition
1. Tags and wristbands
2. Signal receiver
3. Export monitor
4. Signal repeater
5.POE communication gateway
6. Service software
Advantages of baby anti-theft system
1. The equipment adopts concealed installation
System components such as gateways, signal receivers, repeaters and other equipment can be installed on the ceiling in the corridor or ward. It is difficult for general non-system maintenance personnel to find the existence of the monitoring system, which does not affect the appearance of the ward and is not easy to be stolen by criminalsFound and destroyed.
2. Real-time monitoring and active protection
The baby tags used in the ward report (heartbeat) data at regular intervals, so as to realize the active protection function of baby safety.
3. Real-time monitoring of equipment failures and alarm prompts to prevent the equipment from being maliciously damaged
The system has the function of online detection of the equipment status installed on site. When a certain equipment fails, it will return equipment failure information or no information data, the system will immediately start the fault alarm prompt. This method can effectively prevent equipmentFailure or destruction leads to unexpected events.
4. Baby label design accords with ergonomic design, comfortable to wear
The label and wristband design is very exquisite and conforms to the ergonomic design. It is currently the smallest and lightest baby label in China. The design of this product has a number of national patents. Solve the problem that the baby tag is easy to rotate when wearing,The problem of slipping.
5. Good system scalability
The exit monitor has a switch control port, which allows linkage with the access controller to realize the opening/locking of the access control.The system gateway allows access to network cameras to obtain video information at the entrance and exit of the ward.
6. The system can increase the baby’s location short message prompt function
Combined with the SMS platform in the hospital, the location and time of the baby passing through a certain entrance and exit can be notified to family members in a timely manner via SMS.
7. Simple installation and wiring, low construction difficulty
The main workload of the system installation is the POE network wiring of the signal receiver and the exit monitor, and the construction amount is small.
[ad_2]
