chrispeng [ad_1]
620)this.style.width=620;” border=0>
It is designed to enable factory managers to fully grasp the job site information and effectively control the manufacturing and production process operations. It is not only for complete and real-time factory activity status and information, so that managers can make the best site management and improve the overall Productivity, while strengthening its product quality assurance and building customer trust. Pay attention to management functions such as factory manufacturing foolproof, resource tracking, and real-time analysis. From the perspective of overall operation, it is connected between the upper-level manufacturing ERP system and on-site operations/production equipment to provide real-time and accurate actual production data. In turn, it helps managers to formulate operational research plans. From the point of view of on-site management, it integrates the data of various units (such as materials, production management, manufacturing, quality control, warehouse management, etc.) on the factory site, so that each unit can quickly obtain the information needed for the operation to improve production efficiency, Product quality and customer satisfaction.
Question: Generally, when scanning barcodes, the barcode scanner is connected to the computer through a connection, and the barcode information is received into the computer, so that each scanner needs a computer. Such a cost is unacceptable.
Solution: Now the problem can be solved through our company’s data collector. One computer can control multiple data collectors, and the scanner can be connected to the data collector. Successfully solved the cost problem.
1. System composition:
In order to provide accurate data to the manufacturing ERP system, we use the following hardware equipment:
Display Kanban at the production site
Terminal computer
ISBN printer
Barcode Scanner
Barcode data collector
In addition, software for data collection and display at the production site is provided.
2. Control principle
Connection diagram of PC, scanning gun, and data collector
620)this.style.width=620;” border=0>
3. Data collector function
· The data collector has a power failure protection function. After a power failure, the information can be stored for two months.
· When the computer or network cable is broken, the data collector can store 2000-3000 bar code information.
· The data collector comes with a clock, and each bar code generates information such as the current time.
· The data collector has its own address number, which can be set at will.
· The data collector comes with a scan output signal, and every scan, there is a pulse output.
· The computer collection software is simple and convenient to operate, running in windows or other environments.
Four, function introduction
When an enterprise implements ERP or computer MIS management, the accuracy of data is very important. Using the system’s production bar code operation method can provide a good helper for ERP enterprises to successfully implement ERP or computer MIS.
* Timely and accurate data collection
* The system is simple and practical, with low investment
* The production cycle is short, and the system can be used in production in less than 30 days
* The effect is immediately visible in the implementation of computerized management in the enterprise
Five, physical display
620)this.style.width=620;” border=0>
620)this.style.width=620;” border=0>
Computer: Collect the data from the data collector and send it to the billboard for display after processing
Software: used to calculate and process all kinds of data, and coordinate the orderly and normal operation of each part
620)this.style.width=620;” border=0>
[ad_2]
