Tangyuan Electronic RFID Military Unit Sentry Gun Anti-looting Alarm Management System
chrispeng [ad_1]
1. System significance
Emergency handling of malignant incidents: When the on-duty firearms and ammunition are robbed, the sentry is attacked, and the firearms leave their posts and other emergency situations occur, the system can transmit the on-site sentry information, alarm information (guns off position or sentry off guard), and monitoring screens in real time. Return to the back-office management center for inspection by the security department of military units to provide a basis for rapid handling of such vicious incidents, and to prevent major vicious cases involving guns and ammunition from occurring;
Full-scale supervision of guard changing and gun handover automation: Unit guards carry guns and perform real-time supervision over the whole process of changing guards and gun handovers. The whole process of changing guards and gun handovers can be completed automatically according to predetermined procedures without human intervention.
2. System architecture and program description
The military unit sentry gun anti-looting emergency response system is based on the recent incidents of gun-looting and assaulting police in certain military units. It uses the most advanced radio frequency identification technology and sensor technology in the world. , Monitoring technology, communication technology, RTLS real-time positioning technology based on the development of security systems. The system has the characteristics of real-time alarm of gun and person leaving position, event recording, disarming and arming, tracking and positioning, wide practicability, and strong anti-interference.
2.1 System architecture
Figure 1 System network architecture
Figure 2 System diagram
2.2 Program description
Figure 3 Installation position
Anti-disassemblyelectronic label(There is a micro-control switch at the sticking place) Installed on the butt, the electronic tag will send the electronic tag signal and safety status information to the signal receiver in real time. If the background fails to detect within a period of time (such as: 5 seconds, 10 seconds, etc.) When the information sent by the electronic tag or the abnormal status information is received, the alarm system and the security monitoring system of the security department monitoring center will automatically start. At this time, the LCD screen will display the current sentry situation, the identity information of the sentry on duty, location information, etc., monitor The center can dispatch nearby security personnel to assist in handling emergencies according to the actual situation.
Three, hardware equipment introduction
3.1 Semi-active RFID low-frequency activator
TY-A201A type low frequency exciter
3.3 Semi-active RFID desktop card issuer
TY-R401A Desktop Card Issuer
3.4 Semi-active RFID electronic tags
TY-T602A dual-frequency card type electronic label
TY-T603A type tri-band electronic label
[ad_2]
