Introduction of Anxuntong’s Barrier-free Channel Management System

one, Issues related to enterprise access control

Enterprise access management has always been a difficult problem. Imagine that in a small and medium-sized factory, thousands of people have to enter the gate of the factory at the same time every morning when they are working every morning. Managers all hope that they need to understand the following information in the shortest time:

1. Who has entered the factory?

2. Do they have legal identities and permissions?

3. Who should come and not come?

4. Who left the factory at the same time as a large number of people entered? Do they have the appropriate permissions?

5. Did they arrive late and leave early?

The further question is:

1. After they entered the factory gate, which factory or office building did they enter, or directly into the bath? Do they have the appropriate permissions?

2. Where is everyone now?

3. Can you monitor and prevent problems before they occur?

4. If a problem occurs, how to quickly verify it afterwards?

The traditional solution may be to use attendance machines, surveillance, fingerprints and barriers. However, the problems of these systems are obvious: when the fingerprint system searches for a few thousand, the speed is a problem, and there are problems such as unsanitary, rejection rate, and misrecognition rate; Control, and there is a problem of swiping cards on behalf of; the speed of the barrier gate system is relatively slow, and when several shuttle buses arrive, there will be long queues, and it is obviously not humane. However, since the monitoring system cannot be truly linked with the management system, pre-prevention requires a lot of manpower. In the end, it can only play the role of post-verification, and the value is greatly discounted.

These seemingly basic and simple problems have never been a perfect solution. For so many years, everyone seems to have been accustomed to this, until the fast barrier-free channel developed by our company for 3 years has finally been developed and successfully applied. …

two, Main features of Anxuntong system

1, Support long-distance automatic swiping and short-distance active swiping

The staff only need to carry the card on the body or in the bag, without actively swiping the card, and pass it naturally, which is user-friendly, fast and convenient.

2, Illegal user alarm function

When an outsider passes through the passage without a card, the passage will give an audible and visual alarm to remind the security personnel, and at the same time, it will capture the image data of the passer without a card. Effectively prevent the entry of illegal personnel, and also prevent people from the unit from going out without registration.

3. Two-way entry and exit, automatic direction recognition

Each channel can enter and exit, which greatly improves the utilization rate of the equipment. When personnel pass, the system will automatically identify the direction of entry and exit, providing more accurate data for managers, and also preventing people from entering and exiting immediately.

4. Identify a card by one person

Every time a person passes, the system can only recognize one card, which effectively prevents the phenomenon of substituting card swiping.

5. Pass quickly

According to user actual measurement, the dual channel can pass more than 150 people per minute without congestion.

6. Real-time data management

All data is transmitted in real time, from the passing of the personnel to the viewing of the data by the supervisor, there is only an interval of 0.7 seconds, and all the reports are presented immediately at the click of a button.

7. twenty fourHourly surveillance video linkage function

When someone passes through, the computer of the relevant management personnel (such as the clerks of various departments) will immediately display the corresponding information; the system supports remote video monitoring function, and the leader can directly monitor the picture of any camera in the office.

8, Remote data and video real-time monitoring function

The system can perform 24-hour surveillance video on the person passing through the channel. Not only can the information of the passing person be synchronized on the video, but also personal information such as the person’s name, photo, class, etc. will be displayed during the video playback. Once there is a problem, you can easily locate the corresponding responsible person.

9, Fingerprint recognition

For those who do not have a card or who cannot be sure of their identity, fingerprints can be used to verify.

three, system structure

　　　　　　　　　　 　　　

² The system adopts distributed network management. All data exists in the central database and the local database at the same time. When there is a data change (such as account opening, loss reporting, account cancellation, etc.), the data is automatically synchronized within the network

² When the network or server fails, it will not affect the operation of the channel control system.

² When uploading data, if the network or database fails, all data will be automatically cached in the hard disk as a file, and will be automatically uploaded when the failure is restored.

² All data transmission will be verified, and the verification will be automatically retransmitted if the verification fails, and the data will not be wrong.

Four, System hardware composition

project	instruction
aisle	Including channel shells, antennas, channel controllers, warning lights, infrared switches, etc. Identify the user’s smart card, determine the user’s entry and exit, sound and light alarm when a user without a card passes, and communicate with the computer or the channel server. The channel controller itself has anti-tailing and fuzzy recognition functions
line	See “System Structure”, including 12V power line, video line, 485 bus, network line
Video camera	Used to take pictures of the passage in and out
Video server	Install a monitoring compression card to link with the channel management system for video recording and electronic photography. When the requirements are not high, a computer can be shared with the channel management computer.
Card issuer (Smart card reader)	Read smart card information, user card issuance and card replacement
smart card	The system can recognize various types of smart cards, including EM, M1, TI, etc. Support both long-distance and short-distance cards.
Fingerprint Collector	Collect and process fingerprint information.

five, System operating environment requirements

² Guard management computer

1. Without video function:

i. Hardware: C1.7G, 40G hard disk, 256M memory, dual serial ports

ii. Operating system: Windows series are available.

2.With video function

i. Hardware: P2.0G or more, 80G hard disk (preferably 160G), 512M memory, dual serial ports, 64M video memory

ii. Operating system: Windows2000 Advanced Server

² Other management computers

Unlimited hardware

Software: Windows series are available

² Network environment

For the network version of the system, it is required that all the management computers can ping with the central data server.

Each remote video surveillance computer must be able to ping through the video server.

*The above hardware configuration is only recommended configuration. If it is lower than this configuration, it does not mean that it cannot be used, but the effect needs to be tested according to the actual situation.

six, Main parameters of Anxuntong smart channel

Channel width:The passage width of each channel is 65-75cm.

thickness:The thickness of the equipment board is 7cm-12cm, and the thickness of the isolation board is 3-11cm. The evacuation of personnel will not be affected in the event of an accident.

outdoor:In addition, outdoor channels are designed to resist low temperature (minus 30 degrees Celsius), waterproof, and lightning protection.

Power supply:DC 12V, the rated current of each channel controller is <0.3A, and the peak current of the long-distance antenna power supply is <1A.

working environment:Temperature -10 degrees or -30 degrees (outdoor type) ~ 30 degrees, humidity 0~90%

way of communication:The 485 transmission mode is adopted between the channel and the data acquisition computer, the baud rate is 19200, and the transmission distance is not less than 500 meters. The data is transmitted between the data collection computer and the management center through TCP/IP.

Personnel passing speed:20km/hour, adjustable speed.

Multiple people pass recognition distance:As long as the distance between two people exceeds 25cm, they can be recognized normally.

Fingerprint recognition speed:5000 fingerprint recognition speed <1.5 seconds

Long-distance automatic recognition interval:55cm to 135cm from the ground

Support smart card:Mifare One(M1), EM_ID, electronic label, barcode card

database:SQL Server

Database organization structure:Distributed, that is, each access control acquisition computer has a local database to keep synchronization with the central database.

Data buffer processing:The second level cache, that is, when the data cannot be uploaded to the management center, the data will be automatically cached to the local computer. If there is a problem with the database of the local computer, the data will be automatically cached to the file.

seven, Anxuntong Intelligent Channel Management Software

　　　　　　　

² When the user passes, the user’s name, department (content can be set), photo and basic information are displayed in real time (with a delay of 0.1-0.2 seconds)

² When people pass, the passed data is broadcast to the management node on the network, and the leader can see each person’s passing data in real time through the network while sitting in the office.

² When the user does not have a card or authorization (such as expired or not in the system card), the system will automatically alarm and prompt, and can automatically take pictures and archives.

² To prevent following, one card can only pass one person

² For two-way channels, the system can identify and display the user’s entry or exit

² Different alarm sounds can be set separately for each channel

² In the case of no card due to special circumstances, you can register to manually replenish the card or verify the user’s identity through fingerprints.

² If the management center cannot be connected due to a server or network failure, the operation of the system will not be affected, and the data will be automatically retransmitted after the failure is restored.

² Each computer can manage four channels.

² Connect with channel hardware through 485 bus;

² The channel management system automatically synchronizes data with the central system when it is turned on. When the central system cannot be connected, the system will start and operate normally.

Eight, Attendance Management

l Adapt to various complicated attendance statistics: Normal attendance (attendance days, attendance hours), abnormal attendance (such as absenteeism, early departure, midway entry and exit, late arrival, early departure, missed credit card, single credit card), overtime (overtime on rest days, overtime on holidays), various leave and shifts Statistics of work frequency.

l Flexible setting of various shifts in the company, allowing companies to coexist with different get off work schedules(Security personnel, production department personnel shift shifts, supervisors, drivers, field personnel on flexible shifts, production line personnel continuous shifts, etc.), support manual scheduling, computer automatic scheduling, support employee shifts, etc. The system can automatically count their attendance status.

l Flexible attendance methods:The system allows employees of different levels and types of work to have different attendance methods. It is possible to set up card-free personnel (such as senior executives), flexible personnel (drivers, etc.), overtime continuous-shift card-swiping, attendance/rest processing on rest days, holidays, and compensatory time off.

l Automatic calculation of overtime:The system can be set to calculate overtime by computer, support overtime registration, support rounding calculation (such as 30 minutes or 60 minutes), rounding calculation, and accurate calculation.

l Statistics of late arrivals and early departures:The number of late arrivals, early departures and accumulated time can be counted by segment.

l Convenient query function:Query the employee’s original credit card data and attendance status by department, shift, personnel number, card number, name, and date, query the employee’s monthly attendance status, and separately query lateness, leave early, absenteeism, etc., the query results can be printed immediately, what you see .

l Powerful report function:The format of the report type can be freely defined by the report generator, and the print column can be freely selected. Provide daily attendance reports, monthly reports, annual reports and irregular reports, various leave reports, overtime reports, late, early leave, absenteeism and other abnormal reports, personnel file reports, employee card swipe data reports, daily attendance reports, etc.

Nine, Video Surveillance Center

　　　　　　　　 　　　　　　　　　　　　　　

Ø It can record manually and automatically.

Ø The automatic recording time can be set according to the week and time.

Ø Using the most advanced H.264 technology in the world, under the premise of ensuring high-quality image effects, the measured bit stream per channel is only 1.6G for 24 hours, and the 160G hard disk dual-channel video can be stored for more than 40 days.

Ø Linked with the front desk channel control system, it can realize the normal and illegal passing photos of the personnel.

Ø Originally connected to the back-end database, the passer’s photo information can be displayed at the same time during video playback.

Ø When recording, the name of the person can be superimposed on the screen.

Ø The monitoring system can manage four monitoring channels.

ten, Remote monitoring and management

　　　　　　　　

A manager with management authority can monitor any monitoring screen in real time while sitting in the office.

On the remote monitoring terminal, operations such as video recording and photographing can be carried out.

The historical monitoring records of any guard can be called remotely.

eleven, User profile management

　　　　　　　

² Network management, the program can run on any computer connected to the central server.

² The system supports manual entry and batch entry of electronic documents in two ways

² Multi-level tree department management

² Support card operations such as card registration, card replacement, loss reporting, account cancellation, etc. All changes in the number are broadcast to the network within one second, and all subsystems are automatically synchronized.

² Support department adjustment of batch personnel

² Comprehensive authority management allows the managers of each department to independently maintain the internal data of the department.

² Quick personnel search: Support searching by department, name, pinyin and various combinations, and support swiping card query.

² Supports batch photo import in multiple ways, and can also quickly take pictures on-site through a USB camera.

twelve, Relationship with other systems

The system can run independently and has a software interface, supporting all-in-one card use.